![]() |
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: On the road to recovery posted by neolith on August 26, 2010 at 06:58:32:
Hi Neo,
Well I removed those nasty resistors and went over some solder joints. The joints did look browner on the speaker with the duller tweeter. Things do seem better now, - perhaps the tweeters are not 100% balanced but there are closer and better than befor, - I might be able to fine tune with a 0.5 ohm resistor in the louder one or something. Its certainly not worth buying a new tweeter from Magnepan, - it will set me back about $700 with the shipping at least, - its not worth the money.
I didn't measure the resistance of the tweeters yet yet but the tweeter gap at the back is about 4.5 mm so I am pretty sure they are the later 3 ohms tweeters with the smaller gap. I remember the tweeters on my Dads MGIIIs looking wider in that gap than these do.
Am sorting out my crossover and things are progressing nicely. The main hurdle to come is sorting out the banana peel on the bass panel of these speakers!, - not looking forward to that. Hopefully the DAP contact cement I ordered from the USA will arrive so so I can get on with this pain of a job!
All the best,
Colin
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups Full ThreadTopic - Tweeter difference problem with 3.3Rs - Davy 04:16:39 08/24/10 (88)
- RE: Tweeter difference problem with 3.3Rs - RickeyM 05:27:14 08/25/10 (3)
- RE: Tweeter difference problem with 3.3Rs - Davy 07:57:11 08/25/10 (2)
- A shock of horrors! - RickeyM 21:11:06 08/25/10 (1)
- RE: A shock of horrors! - Davy 03:45:15 08/26/10 (0)
- RE: Tweeter problem with 3.3Rs - andyr 14:14:48 08/24/10 (16)
- RE: Tweeter problem with 3.3Rs - Davy 15:10:12 08/24/10 (15)
- RE: Tweeter problem with 3.3Rs - andyr 15:54:28 08/24/10 (14)
- RE: Tweeter problem with 3.3Rs - Davy 16:12:21 08/24/10 (13)
- RE: Tweeter problem with 3.3Rs - andyr 16:30:27 08/24/10 (12)
- RE: Tweeter problem with 3.3Rs - Davy 16:32:22 08/24/10 (11)
- Yes - hot iron & apply heat for the minimum amount of time possible. :-)) nt - andyr 16:34:36 08/24/10 (10)
- RE: Yes - hot iron & apply heat for the minimum amount of time possible. :-)) nt - Davy 16:53:23 08/24/10 (8)
- Tweeter works with no connection in the attenuator socket - neolith 18:04:48 08/24/10 (7)
- RE: Tweeter works with no connection in the attenuator socket - Davy 03:12:57 08/25/10 (6)
- RE: Tweeter works with no connection in the attenuator socket - neolith 08:23:33 08/25/10 (5)
- Part of the tweeter mystery solved! - Davy 03:07:14 08/26/10 (3)
- On the road to recovery - neolith 06:58:32 08/26/10 (2)
- Making further progress! - Davy 17:09:04 08/26/10 (0)
- RE: On the road to recovery - Davy 08:04:41 08/26/10 (0)
- RE: Tweeter works with no connection in the attenuator socket - Davy 08:40:23 08/25/10 (0)
- RE: Yes - hot iron & apply heat for the minimum amount of time possible. :-)) nt - Davy 16:36:14 08/24/10 (0)
- RE: Tweeter difference problem with 3.3Rs - sailor321 11:07:00 08/24/10 (0)
- RE: Tweeter difference problem with 3.3Rs - Hagar - IIIa 09:06:47 08/24/10 (0)
- RE: Tweeter difference problem with 3.3Rs - RickeyM 06:36:03 08/24/10 (64)
- RE: Tweeter difference problem with 3.3Rs - Davy 06:38:58 08/24/10 (63)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 11:17:10 08/24/10 (61)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 12:52:02 08/24/10 (60)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 13:48:36 08/24/10 (59)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 14:01:07 08/24/10 (58)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 19:56:05 08/24/10 (57)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 03:25:15 08/25/10 (56)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 09:33:15 08/25/10 (55)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 09:50:54 08/25/10 (54)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 12:09:15 08/25/10 (53)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 14:31:00 08/25/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 14:24:50 08/25/10 (51)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 16:28:09 08/25/10 (50)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 17:08:39 08/25/10 (49)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 21:32:43 08/25/10 (48)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 05:32:24 08/26/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 05:09:29 08/26/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 03:44:40 08/26/10 (45)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 06:58:06 08/26/10 (44)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 08:00:33 08/26/10 (43)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 15:13:40 08/26/10 (42)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 17:12:54 08/26/10 (41)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 21:05:30 08/26/10 (40)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 07:48:02 08/27/10 (39)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 10:04:10 08/28/10 (31)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 12:29:21 08/28/10 (30)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 16:48:22 08/28/10 (29)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 19:26:00 08/28/10 (28)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 19:41:51 08/28/10 (27)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 19:29:51 08/29/10 (25)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 10:07:31 08/30/10 (24)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 17:21:39 08/30/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 16:24:11 08/30/10 (22)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 14:23:34 08/31/10 (21)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 15:45:48 08/31/10 (20)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 20:35:25 08/31/10 (19)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 03:34:03 09/01/10 (18)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 14:35:20 09/01/10 (17)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 18:07:36 09/01/10 (16)
- MGIII crossover setting - MaggiesAndCats 13:14:18 09/02/10 (1)
- RE: MGIII crossover setting - Davy 19:09:10 09/02/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 11:16:33 09/02/10 (13)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 19:27:58 09/02/10 (1)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 04:42:22 09/04/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 19:21:35 09/02/10 (10)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 01:19:41 09/03/10 (8)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 04:58:32 09/03/10 (7)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 14:12:36 09/03/10 (6)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 15:05:42 09/03/10 (5)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 19:46:41 09/03/10 (4)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 07:11:41 09/04/10 (3)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 23:52:22 09/04/10 (2)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 18:52:21 09/05/10 (1)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 05:40:23 09/06/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 09:47:52 09/06/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 03:57:00 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 06:08:40 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 09:25:53 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 10:21:17 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 12:26:32 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 14:37:48 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 20:24:33 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 21:13:02 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 01:31:01 09/08/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 05:04:26 09/08/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 23:01:23 09/08/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 04:23:36 09/09/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 11:16:11 09/09/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 20:50:35 09/09/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 14:48:30 09/09/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 03:14:34 09/10/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 04:02:48 09/10/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 04:10:39 09/11/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 07:46:32 09/11/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 16:18:10 09/12/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 04:43:47 09/13/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 13:54:49 09/13/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 15:57:28 09/13/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 15:12:09 09/14/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 07:01:37 09/15/10 (0)
- Re: Quad 99 CDP2 - Satie 09:11:22 09/15/10 (0)
- RE: Re: Quad 99 CDP2 - Davy 15:06:14 09/15/10 (0)
- RE: Re: Quad 99 CDP2 - Davy 09:15:20 09/15/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 06:48:18 09/15/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 20:39:40 09/15/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 09:28:13 09/16/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 13:15:43 09/16/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 16:39:13 09/16/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 20:40:03 09/16/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 06:37:44 09/18/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 07:35:58 09/19/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 11:46:40 09/19/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 01:22:09 09/20/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 07:25:47 09/20/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 21:07:46 09/16/10 (0)
- Aah, Msieur Satie ... - andyr 04:21:15 09/07/10 (0)
- RE: Aah, Msieur Satie ... - Davy 06:09:52 09/07/10 (0)
- No, my LP12 had the Cirkus installed as soon as it came out. ... - andyr 16:16:43 09/07/10 (0)
- RE: No, my LP12 had the Cirkus installed as soon as it came out. ... - Davy 17:44:32 09/07/10 (0)
- RE: Aah, Msieur Satie ... - Satie 05:59:39 09/07/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 20:38:31 09/02/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 19:48:55 08/28/10 (0)
- Musical joy and other priorities - MaggiesAndCats 11:27:44 08/27/10 (1)
- RE: Musical joy and other priorities - Davy 15:15:58 08/27/10 (0)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 08:56:08 08/27/10 (4)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 13:59:44 08/27/10 (3)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 15:04:58 08/27/10 (2)
- RE: Tweeter difference problem with 3.3Rs and more - Davy 15:35:52 08/27/10 (1)
- RE: Tweeter difference problem with 3.3Rs and more - Satie 10:35:51 08/28/10 (0)
- RE: Tweeter difference problem with 3.3Rs - RickeyM 06:48:09 08/24/10 (0)
Follow Ups
- Making further progress! - Davy 17:09:04 08/26/10 (0)