RE: Is this feasible? Rectifying 6.3v for heaters

Follow Ups Full Thread

Topic - Is this feasible? Rectifying 6.3v for heaters - DAK 12:21:55 12/07/17 (82)

Must be, my once were LEAK St20s had a 5V heater winding for the GZ34/5AR4 rectifier - Timbo in Oz 20:37:22 12/08/17 (7)

RE:Do you remember what you did to provide the 6dj8 voltage? - DAK 21:18:24 12/08/17 (6)

I just wanted and my tech. agreed we should go with low Mu high GM tubes in the front-end, and cut the NFB - Timbo in Oz 21:08:08 12/09/17 (0)

RE:Do you remember what you did to provide the 6dj8 voltage? - JKT 22:10:55 12/08/17 (4)

The voltage doubler circuit! - DAK 07:55:23 12/09/17 (3)

RE: The voltage doubler circuit! - Eli Duttman 16:04:29 12/09/17 (2)

I can manage the VD part how does the regulator work? - DAK 18:12:14 12/09/17 (1)

RE: I can manage the VD part how does the regulator work? - Eli Duttman 19:18:09 12/09/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Triode_Kingdom 22:02:13 12/07/17 (1)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 22:56:00 12/07/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Paul Joppa 19:47:07 12/07/17 (1)

RE: Is this feasible? Rectifying 6.3v for heaters - DAK 20:50:17 12/07/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 14:24:48 12/07/17 (58)

thanks for sharing. - DAK 18:31:27 12/07/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 14:42:09 12/07/17 (55)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 15:38:24 12/07/17 (49)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:22:52 12/08/17 (48)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 09:30:05 12/08/17 (47)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 11:26:39 12/08/17 (46)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 20:17:33 12/09/17 (22)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:06:24 12/11/17 (21)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 20:17:19 12/11/17 (20)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:23:29 12/12/17 (19)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 21:41:54 12/13/17 (17)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:40:44 12/14/17 (16)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 22:49:40 12/14/17 (6)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 12:27:54 12/15/17 (1)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 15:05:08 12/15/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 23:15:24 12/14/17 (3)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 12:26:42 12/15/17 (2)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 17:56:31 12/18/17 (1)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:25:49 12/19/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 09:48:26 12/14/17 (8)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 10:45:59 12/14/17 (7)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 18:26:21 12/16/17 (6)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 09:30:08 12/18/17 (5)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 17:35:37 12/20/17 (3)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:16:51 12/21/17 (2)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 14:28:51 12/21/17 (1)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 14:48:33 12/21/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - coffee-phil 15:44:30 12/18/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:13:34 12/13/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Tre' 12:54:17 12/08/17 (22)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:15:42 12/18/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 12:56:59 12/08/17 (20)

RE: Is this feasible? Rectifying 6.3v for heaters - Tre' 13:59:15 12/08/17 (19)

The vertical scale you use is misleading... - Steve O 15:39:31 12/08/17 (16)

No it's not. - Tre' 16:06:51 12/08/17 (15)

Yes it is...you missed my point entirely (and my edit) (nt) - Steve O 16:14:47 12/08/17 (14)

Audio Pete suggested half wave and my post was directed at Pete. (nt) - Tre' 18:23:17 12/08/17 (13)

My broader point was... - Tre' 18:27:07 12/08/17 (12)

RE: My broader point was... - Steve O 14:23:26 12/09/17 (10)

RE: My broader point was... - Tre' 22:25:23 12/09/17 (9)

6.3VAC thru hipass filter to "reveal"/emphasize noise and junk... - Steve O 05:58:59 12/10/17 (8)

RE: " A toroid transformer would be worse." - 1973shovel 08:09:12 12/10/17 (2)

RE: " A toroid transformer would be worse." - Steve O 08:42:04 12/10/17 (1)

Thanks - 1973shovel 13:07:23 12/10/17 (0)

RE: 6.3VAC thru hipass filter to "reveal"/emphasize noise and junk... - dave slagle 07:39:53 12/10/17 (3)

RE: 6.3VAC thru hipass filter to "reveal"/emphasize noise and junk... - Steve O 08:30:15 12/10/17 (2)

RE: 6.3VAC thru hipass filter to "reveal"/emphasize noise and junk... - dave slagle 07:37:30 12/11/17 (1)

RE: 6.3VAC thru hipass filter to "reveal"/emphasize noise and junk... - Steve O 12:42:07 12/11/17 (0)

You're right. I didn't consider that. - Tre' 07:34:36 12/10/17 (0)

+1. - JKT 22:00:25 12/08/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 14:48:48 12/08/17 (1)

"..do what makes you feel best." - Tre' 16:08:10 12/08/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Steve O 15:18:42 12/07/17 (4)

RE: Is this feasible? Rectifying 6.3v for heaters - Audio Pete 07:19:53 12/08/17 (3)

I use LT1085 for the filament supply in my preamplifier, but... - Lew 08:59:29 12/08/17 (2)

RE: I use LT1085 for the filament supply in my preamplifier, but... - Triode_Kingdom 12:07:27 12/08/17 (0)

RE: I use LT1085 for the filament supply in my preamplifier, but... - Audio Pete 09:33:01 12/08/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - pictureguy 14:27:26 12/07/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - DAK 13:11:36 12/07/17 (0)

Use PSUD2 simulation - sser2 12:55:09 12/07/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Tre' 12:54:30 12/07/17 (8)

RE: Is this feasible? Rectifying 6.3v for heaters - DAK 13:15:03 12/07/17 (7)

RE: Is this feasible? Rectifying 6.3v for heaters - Eli Duttman 14:38:57 12/07/17 (6)

RE: Is this feasible? Rectifying 6.3v for heaters - DAK 17:55:25 12/07/17 (5)

RE: Is this feasible? Rectifying 6.3v for heaters - Eli Duttman 01:38:13 12/08/17 (3)

RE: How do you implement the LM117? NT. - DAK 07:24:54 12/08/17 (2)

RE: How do you implement the LM117? NT. - Jim McShane 08:33:57 12/08/17 (1)

Thanks for catching that. - DAK 08:42:24 12/08/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Tre' 18:50:36 12/07/17 (0)

Follow Ups

RE: Is this feasible? Rectifying 6.3v for heaters - DAK 13:15:03 12/07/17 (7)

RE: Is this feasible? Rectifying 6.3v for heaters - Eli Duttman 14:38:57 12/07/17 (6)

RE: Is this feasible? Rectifying 6.3v for heaters - DAK 17:55:25 12/07/17 (5)

RE: Is this feasible? Rectifying 6.3v for heaters - Eli Duttman 01:38:13 12/08/17 (3)

RE: How do you implement the LM117? NT. - DAK 07:24:54 12/08/17 (2)

RE: How do you implement the LM117? NT. - Jim McShane 08:33:57 12/08/17 (1)

Thanks for catching that. - DAK 08:42:24 12/08/17 (0)

RE: Is this feasible? Rectifying 6.3v for heaters - Tre' 18:50:36 12/07/17 (0)

Post a Message!