In one of the threads on panel vibration and tweaks, DawnRazor suggested I swap wires......Well, I never got an elaboration on that point. When I said that my preamp has an absolute phase switch and that I didn't hear much effect.........? I don't hear many recordings where absolute phase makes a difference.
Well, the Tweeter panel and the mid/bass panel are electrically out of phase. The 2-way crossover is 1st order and 2nd order which are 90 degrees out of phase. Is this what dawn meant?......change relative phase on the 2 speaker elements of my 1.6s? When I rotated the panels in place, the tweeters ended up 'inside' which is the reverse of Magnepan's intent.
I am now technically closer to the tweeter than the mid/low. The reverse is true when the panels are setup according to 'factory recommendations'.
If so, I can do it without opening my panels........Why not just jumper across? Make up some short jumper plugs and cross 'em? With the tweeters 'in' would I be restoring the phase relationship BETWEEN drivers to factory intent?
Just curious if anyone has a thought on this.
Too much is never enough
This post is made possible by the generous support of people like you and our sponsors:
Topic - Crossed Wires - pictureguy 11:55:14 08/11/10 (42)
- RE: Crossed Wires - warmfires 18:44:18 08/11/10 (9)
- RE: Crossed Wires - Dawnrazor 00:23:47 08/12/10 (8)
- RE: Crossed Wires - warmfires 02:48:14 08/12/10 (7)
- Ah no, i'm wrong. - warmfires 02:13:51 08/13/10 (5)
- RE: Ah no, i'm wrong. - Dawnrazor 07:40:55 08/13/10 (4)
- RE: Ah no, i'm wrong. - warmfires 08:54:31 08/13/10 (3)
- RE: Ah no, i'm wrong. - Dawnrazor 19:23:15 08/13/10 (0)
- RE: Ah no, i'm wrong. - pictureguy 16:13:25 08/13/10 (1)
- RE: Ah no, i'm wrong. - Dawnrazor 19:18:49 08/13/10 (0)
- RE: Crossed Wires - Dawnrazor 08:00:12 08/12/10 (0)
- RE: Crossed Wires - Dawnrazor 14:04:48 08/11/10 (8)
- RE: Crossed Wires - pictureguy 00:18:36 08/12/10 (2)
- RE: Crossed Wires - Dawnrazor 00:42:54 08/12/10 (1)
- RE: Crossed Wires - pictureguy 09:06:58 08/12/10 (0)
- RE: Crossed Wires - pictureguy 16:03:33 08/11/10 (4)
- RE: Crossed Wires - josh358 17:04:05 08/11/10 (3)
- RE: Crossed Wires - pictureguy 00:22:03 08/12/10 (2)
- RE: Crossed Wires - josh358 11:41:18 08/12/10 (1)
- RE: Crossed Wires - pictureguy 13:06:59 08/12/10 (0)
- RE: Crossed Wires - JBen 13:18:42 08/11/10 (22)
- RE: Crossed Wires - pictureguy 00:24:16 08/12/10 (1)
- RE: Crossed Wires - Dawnrazor 00:28:01 08/12/10 (0)
- RE: Crossed Wires - Dawnrazor 21:46:49 08/11/10 (19)
- RE: Crossed Wires - pictureguy 09:35:53 08/12/10 (0)
- Let's make it simpler, then. - JBen 23:17:17 08/11/10 (17)
- RE: Let's make it simpler, then. - DrChaos 10:09:21 08/12/10 (0)
- RE: Let's make it simpler, then. - pictureguy 00:25:47 08/12/10 (0)
- RE: Let's make it simpler, then. - Dawnrazor 23:43:33 08/11/10 (14)
- RE: Let's make it simpler, then. - JBen 07:13:26 08/12/10 (12)
- RE: Let's make it simpler, then. - Dawnrazor 08:01:49 08/12/10 (11)
- RE: Let's make it simpler, then. - DrChaos 10:11:23 08/12/10 (10)
- RE: Let's make it simpler, then. - JBen 11:24:38 08/12/10 (9)
- More info - Dawnrazor 20:27:55 08/12/10 (5)
- Tested the tweeter - Dawnrazor 21:05:17 08/12/10 (4)
- RE: Tested the tweeter - JBen 09:42:34 08/13/10 (3)
- More - Dawnrazor 19:47:08 08/13/10 (2)
- I called them the wrong names - factory polarity is inverted for MMG panels - JBen 21:26:19 08/13/10 (1)
- RE: I called them the wrong names - factory polarity is inverted for MMG panels - pictureguy 22:59:31 08/13/10 (0)
- RE: Let's make it simpler, then. - DrChaos 11:53:30 08/12/10 (1)
- RE: Let's make it simpler, then. - JBen 13:48:29 08/12/10 (0)
- RE: Let's make it simpler, then. - pictureguy 11:37:45 08/12/10 (0)
- RE: Let's make it simpler, then. - pictureguy 00:26:43 08/12/10 (0)