|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: RE: Very interesting! ... posted by JBen on December 20, 2017 at 10:33:23:
The Asylum Knows All:
I had to go to square brackets to get it to post. :-)
AFAIK the only jumper option in the E22 switches between the +20 dB FS output and the trim pot. So you'd have to solder in new resistors to reduce the level without the pot. I'd make up a couple of XLF-XLM L-pads except it doesn't make sense to go to the effort since I'm going to be using the SPDIF output with the Mini DSP instead.
For now, I think I'll try going into the AHB2 rather than the A21 -- it's switchable to pro levels. Also, I think I'll make up a couple of balanced cables, I'll need to use 2V FS unbalanced from the Mini DScheaP but for now, there's no reason not to use balanced +4 dBm.
Time to test the Mini DSP too -- I still haven't played with it because my new motherboard to my surprise didn't have an SPDIF output, just Toslink, which the Mini DSP doesn't do. I want to make sure the AES/EBU output is working on the card . . .
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Very interesting! ... - josh358 11:09:30 12/20/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
