|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: RE: DC output posted by rrob on August 9, 2010 at 17:36:15:
You are correct in your thinking. If the Threshold is putting out a DC spike with turn on, it will still do this with an active XO. You may not be seeing the problem with the Threshold on the bass now because the fuse is 4 amps v 2.5 A for the mid. You might get away with using a 4 amp mid fuse since that driver is pretty much bullet proof anyway but as I and Andy explained, in the current biamp setup you are driving the mid panel from DC to around 2000 Hz.
You might want to ask your dealer to check for a DC spike on turn on and ask if this is normal.
"Our head is round in order to allow our thoughts to change direction." Francis Picabia
Edits: 08/09/10 08/09/10 08/09/10
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: DC output - neolith 18:16:22 08/09/10 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
