|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Bad Science posted by john curl on June 21, 2004 at 12:13:02:
JC: ""I put a .033uf polystyrene cap to ground AT THE OUTPUT of the analyzer in order to reduce distortion and noise further.""John..you're shunting the distortion products to ground to clean up the signal..is this the same ground that the input circuitry shares? IOW, how do you determine if that cap is causing a ground issue, and that the cable is intercepting it via a loop?
JC: ""How on earth could two 75 ohm cable measure differently in this case?""
the million dollar question...
Cheers, John
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Hi John - jneutron 12:55:53 06/21/04 (2)
- Re: Hi John - john curl 13:40:42 06/21/04 (1)
- Re: Hi John - jneutron 13:44:58 06/21/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
