|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Thanks for the feedback posted by E-Stat on September 28, 2017 at 10:28:42:
Yes.
I don't see any point in standing-off the module like that. I would mount directly to the chassis bottom and get rid of the brass spacers. You essentially have zero thermal conductivity to the chassis with that configuration.
I imagine there are some sort of raised obstruction(s) in the chassis bottom that prompted the easy-way-out mounting scheme shown. Any obstructions should be removed and the module mounted directly. You could use a small amount of thermal paste as well.
As shown, it's a less than impressive construction scheme.
Dave.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Thanks for the feedback - Davey 10:37:52 09/28/17 (3)
- Thanks for more feedback - E-Stat 11:05:07 09/28/17 (2)
- RE: Thanks for more feedback - Davey 07:35:08 10/03/17 (0)
- RE: Thanks for more feedback - Davey 06:43:57 09/29/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
