|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Vishay inductance very low posted by Victor Khomenko on May 20, 1999 at 19:54:09:
Yes, I'm aware that Vishay claim it's low L and I need to get some samples to verify their claim but my main point is that for jk to connect a whole lot of these up in series, the inductance will most likely be more than the sum of the parts. Anyway, it seemed to be common sense to advise a great single resistor or a very few in parallel to get the desired value, as opposed to series connection of a lot of low valued resistors.In terms of capacitance, it also should be a very small number in that Vishay design and in this case, series is a good thing, as it reduces the effect that much more.
I see why you like designing circuitry involving tubes. :-)
Well, quite frankly, I originally thought jk was going to come back with R values in the 10k to 100k range but the 518k value really surprised me. I'm glad you shed some additional light on the subject, thanks!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Vishay inductance very low - Dave B 20:23:24 05/20/99 (5)
- Thank you both - - jk 07:57:56 05/21/99 (4)
- Re: Thank you both - - john curl 16:18:16 05/21/99 (1)
- Re: Thank you both - - john curl 16:19:44 05/21/99 (0)
- Re: Thank you both - - Dave B 09:19:53 05/21/99 (1)
- its on its way, NT - jk 11:19:22 05/21/99 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
