|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Volume pot hum posted by Steve Eddy on May 19, 2000 at 02:31:44:
Steve,
When I swapped amps, the interconnects, power cord and speaker cables stayed where they were. This afternoon, I also swapped the pots, and the buzz is still coming from the same amp. So it's not a problem with the cables or the pot itself. Where else should I look? Also, as an aside, if and when I do go to the DACT or Welborne kit, should I get a 10k and wire directly from the input as I have with the TKD pots, or would it be best to go for a 100k attenuator in place of the 100k input resistor. And thanks again for your help.Rabie.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Volume pot hum - Rabie. 19:41:43 05/19/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
