|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: I'm about to build a diy turntable isolation shelf... posted by John-from Seattle on April 27, 2000 at 09:49:21:
You might want to test spray painting a scrap MDF board before painting your actual shelf. I built an isolation shelf out of 3/4" MDF and tried spray paint it, but it soaks up too much because it is so dense. I ended up using latex acrylic and a smooth paint roller to actually cover the MDF.good luck.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: I'm about to build a diy turntable isolation shelf... - Stavman 07:44:27 04/28/00 (2)
- Re: I'm about to build a diy turntable isolation shelf... - Moazrt 12:48:07 04/29/00 (0)
- Re: Not having worked w/ MDF, that's good to know, thanks. (nt) - John-from Seattle 15:07:27 04/28/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
