|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
Register / Login
|
In Reply to: RE: A thought... posted by dave slagle on September 19, 2017 at 06:24:11:
...I assume gusser is referring to a steady state condition and not a transient/fault/error condition. I would expect sudden removal of a load under full power/clipping conditions to be problematic. Same for accidentally applying 10s of volts to a low level input as might occur during plugging/unplugging an interconnect into an input of a live amp.
For now my "theory" remains: it's primarily a dI/dt-dV/dt thing and much less so a loaded vs unloaded thing although there is interaction between them.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- "I see gussers concern"... - Steve O 08:22:16 09/19/17 (3)
- RE: No, I do understand the transient vs continuous condition. - gusser 08:49:09 09/19/17 (2)
- Don't capitulate on this point! - Triode_Kingdom 12:57:07 09/19/17 (0)
- Okey-doke! (nt) - Steve O 09:18:54 09/19/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
