RE: What I've learned about this

Posted by flood2 (A) on June 2, 2025 at 21:21:15

In Reply to: What I've learned about this posted by creativepart on June 2, 2025 at 15:07:33:

That's because the Technics alignment has nothing to do with any of Stevenson's alignment options and is based off a different linear offset. The Feickert jig has markings for Stevenson 1B which gives null points at 60.3 and 117.1mm, The Technics null points are 58.8 and 113.5mm and is a universal optimisation that is suitable for all 3 record sizes.

The 52mm overhang is without the rubber gasket and is the headshell flange to stylus distance. Add the gasket AFTER you set the overhang.

Regards Anthony

"Beauty is Truth, Truth Beauty.." Keats

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Who's Right? Technics or Dr. Feickert? - creativepart 14:26:02 05/31/25 (16)

What I've learned about this - creativepart 15:07:33 06/02/25 (3)

RE: What I've learned about this - flood2 21:21:15 06/02/25 (2)

Gasket removed? - creativepart 05:31:42 06/03/25 (1)

RE: Gasket removed? - flood2 13:53:47 06/03/25 (0)

RE: Who's Right? Technics or Dr. Feickert? - John Elison 14:13:32 06/02/25 (0)

RE: Who's Right? Technics or Dr. Feickert? - Capt. Z 18:06:42 06/01/25 (0)

Not a simple question - M3 lover 10:12:33 06/01/25 (0)

RE: Who's Right? playing it by ear? - beach cruiser 22:39:34 05/31/25 (0)

Both? - hesson11 15:26:38 05/31/25 (0)

RE: Who's Right? Technics or Dr. Feickert? - Ozzy 14:50:10 05/31/25 (6)

SL-1300G - creativepart 15:00:46 05/31/25 (5)

RE: SL-1300G - Ozzy 03:04:34 06/02/25 (0)

RE: "The '33' just sits there with no movement" ... - andyr 18:41:03 05/31/25 (3)

Really? - creativepart 15:16:26 06/02/25 (2)

RE: Really? - beach cruiser 17:51:02 06/02/25 (0)

RE: Aah, OK ... - andyr 16:20:38 06/02/25 (0)

Follow Ups

RE: What I've learned about this - flood2 21:21:15 06/02/25 (2)

Gasket removed? - creativepart 05:31:42 06/03/25 (1)

RE: Gasket removed? - flood2 13:53:47 06/03/25 (0)

RE: What I've learned about this

Post a Message!