Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Re: Eli - Try building this.....

195.99.125.202

Hi there,

>>>The dimensions will have to be jiggered.<<<

I STRONGLY recommend to leave the dimensions EXACTLY as shown. Rearrange furniture, put the speakers on stands (they should be on stands in relatively free space anyway) see what you can do.

HiFi Speakers have nothing lost being stuck into cup-borads or the like.

>>>A dowel brace at the back of the Fostex driver will be needed for sure.<<<

Yes. I'd try to actually suspend the driver by the magnet from a brace using suitable adheasive. The actual Basket would only be connected to the Front via a gasket to seal the Box and damp the basket. The actual suspension would be from the magnet. It will likely also pay to damp the chassis somewhat using Bitumen.

>>>Looks like Deflex corner blocks are going to be necessary too.<<<

Don't bother. Just mold something out of a suitable Plastic Material (childrens plastciline?).

>>> Other than the corner blocks, what sort of internal damping would you advise?<<<

Non. But make the enclosure out of Hardwood or at least void free Plywood. MDF is not a very good idea. BTW, I believe Madisound sells a relatively inexpensive readymade Box that has a suiatable size.

>>>For a tweeter, I have in mind the 95 dB sensitive Audax AW014G1 polymer dome tweeter. What value of capacitor would be appropriate for the crossover? <<<

Sounds like a Idea. For the Cap try 1uF or thereabouts. Start with Polycarbonate, just for fun.

Ciao Thorsten


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups


You can not post to an archived thread.