|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Lead weights? posted by Bill Musgrave on October 16, 1999 at 08:56:58:
The bars are in the same area as the nuts and bolts and industrial supplies. They should be next to the rolls of tin and lead flashing which is still used in roofing although many have converted over to dead soft aluminum due to health regulations. I don't believe there is a problem with airborne contamination from lead in this form. The general concern is from handling and because of its past use in paint pigments which can become airborne if disturbed.I have purchased thicker (.062") sheet lead from other sheet metal sources in the area.
Dave
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Lead Bars at OSH - Dave Ingels 10:55:34 10/16/99 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
