|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Thanks for the tips. I will try tonight, but more question posted by twl168 on January 8, 2008 at 13:16:03:
a) uhh, yes... power has to be on
b) doesn't really matter. I would try it both ways (opamps out, then in)
c) With the notch facing left, pin 1 is the lower left corner. Pin 4 is lower right, pin 8 is upper left
8-7-6-5
>
1-2-3-4
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Thanks for the tips. I will try tonight, but more question - pars 17:54:21 01/08/08 (13)
- I am getting reading at around 12 v for both - twl168 23:28:21 01/08/08 (12)
- RE: I am getting reading at around 12 v for both - pars 07:29:40 01/09/08 (11)
- Thanks for the tips. I got correct readings now - mit168 08:11:06 01/09/08 (10)
- RE: Thanks for the tips. I got correct readings now - pars 10:07:10 01/09/08 (9)
- I guess wrong. I do not have the service manual. - twl168 22:44:50 01/09/08 (0)
- Thanks. I do have service manual, but - twl168 10:43:12 01/09/08 (7)
- RE: Thanks. I do have service manual, but - pars 11:29:04 01/09/08 (6)
- I only hope it's that simple... - twl168 15:13:04 01/09/08 (5)
- RE: I only hope it's that simple... - pars 15:27:34 01/12/08 (4)
- No progress - twl168 16:24:09 01/21/08 (3)
- RE: No progress - pars 16:35:17 01/21/08 (2)
- RE: No progress - twl168 16:58:12 01/21/08 (1)
- RE: No progress - pars 19:56:11 01/21/08 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
