Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

RE: dead channel SS amp

I thouhgt I would jump in and see what happens, its an old Threshold 400a that I love but have replaced with some Oddyssey monos that I like. I have nothing to lose, as long as I respect voltage. When I first looked nothing jumped out at me as being burnt or loose. I got one side good so I will start with ohm checks each side at a time and see where I am at. Put power and a 1khz signal to the amp, use the old chop stick technic start tapping connections to see if anything shows a bad conection or break. Any suggestions are more then welcome. Thanks
Safty first always


This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Follow Ups Full Thread
Follow Ups
  • RE: dead channel SS amp - sunseeker 14:04:31 11/28/07 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.