|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Replacement Capacitors for ARC LS7 posted by Jim McShane on August 7, 2005 at 09:51:03:
Mike,
What are the brand and part #'s of the diodes you replaced in your LS7 preamp? Did you go with Hexfreds? Or Shotkys? Or a different brand? I think there are a total of eight Diodes to replace. Am I correct on this? I have done the following so far to my LS7 with excellent results.
replaced coupling caps ( sonicap gen 1) and bypasses ( sonicap platinum)
Replaced the stock tube sockets with ARC gold plated tube sockets
As the main board on my unit was an early production ( part # of circuit board ending in "C" I did the mod to reduce the crosstalk to that of an "E" board.
I am going to upgrade the diodes and then install an IEC socket.
May redo the power supply down the road.
Regards,
Jack Weston
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Replacement Capacitors for ARC LS7 - jackweston 10:54:24 12/12/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
