|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Don't replace normal with slow-blow fuses. posted by Al Sekela on November 26, 2005 at 15:16:39:
The advantage of the fancy fuses may be in the metallurgy of the end caps: depending on the plating process, gold may improve things through corrosion resistanceAl....that is *at least* in part what's occurring, that being a 'better' metallurgy of the plating. This is what I'm hearing. Also, the connecting wire inside the Isoclean fuse is *much* heavier/thicker than what it replaced. That is likely contributing to the better sonics as well, no different than inserting a heavier-gauge power cable on one's amp, allowing greater current flow to the power supply.
or make things worse if the wrong combination of metals was used prior to application of the gold.
I don't believe that is the case whatsoever....I'm hearing increased clarity, definition, resolution....all very musical indeed.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Don't replace normal with slow-blow fuses. - alan m. kafton 15:57:55 11/26/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
