|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Newbie Question - Solder posted by pkell44 on November 4, 2005 at 12:47:23:
Regarding the Hakko 936--this is a good temp controlled iron. You won't need the anti-seize for this one as the tips do not thread on, but instead are held on by a sleeve which itself is threaded on about 2" above the tip. I've never had a problem with this on mine (I see where you're coming from with the Wellers i've used with threaded tips however). 63/37 solder works better IMHO, and solder suckers do work on occasion. Your post is right on in most repects and is good advice.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Newbie Question - Solder - Pars 13:24:01 11/08/05 (1)
- Re: Newbie Question - Solder - pkell44 08:53:49 11/09/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
