|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Connection of the power cord's shield... posted by Soundripples on October 3, 2005 at 15:05:51:
A better method would be to drill out the PCB holes just enough to fit the larger wire into it for a true direct soldering. However, it depends on how much copper is left available on the PCB for a proper solder joint.Otherwise, how are you securing the power cord to the CDP? Is it secured to the chassis' back with a bushing or grommet, or just hanging onto the PCB through a hole in the chassis?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Connection of the power cord's shield... - Duster 16:02:24 10/03/05 (3)
- Re: Connection of the power cord's shield... - Soundripples 17:14:17 10/03/05 (2)
- Re: Connection of the power cord's shield... - Duster 18:56:30 10/03/05 (1)
- Re: Connection of the power cord's shield... - Soundripples 20:04:36 10/03/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
