|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: The DIY market posted by Chris_F on September 22, 2005 at 05:06:15:
DIY, eh ? Then why not build your own chassis/enclosure ? Determine the dimensions of it and hie thyself to a sheet metal shop that supplys aluminum sheet in 0.062 thickness (1/16") and have the necessary pieces sheared. Then have the sheets anodized in your favorite color ("hard coat" anodizing is recommended for scratch resistance) and assemble it using 1/4" aluminum angles as "rails" that hold the sheets together using 1/8" x 3/8" black screws (small bolts) or pop-rivets. Drill or punch all holes before anodizing. DO NOT assemble the enclosure before anodizing or you will have uneven streaks on the sheet metal.Happy Listening !
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: The DIY market - pkell44 06:22:35 09/22/05 (2)
- Depends on the skills of the DIY'er - Chris_F 11:44:48 09/22/05 (0)
- Re: The DIY market - SRMcGee 06:55:05 09/22/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
