Yes, balanced transfer must have a centre-tap ground reference.. - cheap-Jack

Follow Ups Full Thread

Topic - How to wire - 2-24 gauge conductors, with a braided shield for signal wire?...... - Cut-Throat 12:27:23 04/27/07 (58)

In a grounded metal chassis, no shielding is needed for TWISTED pair. - cheap-Jack 11:53:39 04/28/07 (47)

Re: In a grounded metal chassis, no shielding is needed for TWISTED pair. - Dave Cigna 18:04:13 04/28/07 (46)

Re: In a grounded metal chassis, no shielding is needed for TWISTED pair. - kurt s 22:58:09 04/30/07 (24)

The point of confusion is.... - Russ57 08:19:46 05/02/07 (3)

So who brings in the confusion in the first place? - cheap-Jack 08:50:29 05/02/07 (2)

Why is it always you? - Russ57 10:35:39 05/02/07 (1)

Why is it always YOU get so personal? - cheap-Jack 11:48:16 05/02/07 (0)

No, No, No... - Triode_Kingdom 21:28:55 05/01/07 (12)

Re: No, No, No... - kurt s 22:36:56 05/01/07 (11)

Re: No, No, No... - Triode_Kingdom 23:41:41 05/01/07 (9)

Re: No, No, No... - kurt s 09:20:31 05/02/07 (0)

Re: No, No, No... - . 04:53:54 05/02/07 (7)

Are you sure? No-name . !!! - cheap-Jack 08:10:05 05/02/07 (6)

Re: Are you sure? No-name . !!! - . 08:48:44 05/02/07 (5)

Yes, your mouth is full of "nonense" !!! - cheap-Jack 09:10:39 05/02/07 (4)

'Yes, your mouth is full of "nonense" !!!' is poor use of the English language (nt) - . 10:09:38 05/02/07 (0)

oh dear - . 10:08:48 05/02/07 (2)

Stop show off your codes in "an audio forum", bud. - cheap-Jack 12:11:41 05/02/07 (1)

Ipods - . 12:32:28 05/04/07 (0)

PS - kurt s 22:40:36 05/01/07 (0)

I disagree - Dave Cigna 15:31:51 05/01/07 (4)

Me Too... - Triode_Kingdom 22:25:36 05/01/07 (3)

What "signal current" would it be flowing thru the CT? (nt) - cheap-Jack 07:37:01 05/02/07 (1)

Re: What "signal current" would it be flowing thru the CT? (nt) - Triode_Kingdom 12:23:52 05/02/07 (0)

Re: Me Too... - kurt s 22:33:51 05/01/07 (0)

Yes, balanced transfer must have a centre-tap ground reference.. - cheap-Jack 12:57:21 05/01/07 (0)

Me too, only short twisted pair for my MM cartridge - no shield. - cheap-Jack 12:34:08 05/01/07 (0)

Twisted pair works bigtime in 'unbalanced' signal transfer. (long) - cheap-Jack 09:08:12 04/30/07 (17)

a big sigh from me too - Dave Cigna 13:34:00 04/30/07 (14)

I'll buy the beer - Russ57 15:27:02 05/01/07 (3)

I'll buy the second round! - Dave Cigna 15:53:24 05/01/07 (2)

OK, that's too deep - Russ57 16:52:47 05/01/07 (1)

Re: OK, that's too deep - Dave Cigna 15:28:09 05/02/07 (0)

Another orange vs apple talk again !! - cheap-Jack 11:40:02 05/01/07 (9)

another sigh - Dave Cigna 15:11:34 05/01/07 (8)

Why?? - cheap-Jack 16:19:50 05/01/07 (7)

OK - Dave Cigna 15:20:33 05/02/07 (0)

Re: Why?? - . 05:04:36 05/02/07 (5)

What's making noises here? Some spirits without a name? (nt) - cheap-Jack 07:29:44 05/02/07 (4)

it depends - . 07:57:27 05/02/07 (3)

Some insane wantd to wage a war here !!!` - cheap-Jack 08:29:20 05/02/07 (2)

ni hao - Triode_Kingdom 08:04:42 05/03/07 (0)

good grief !!! - . 09:07:38 05/02/07 (0)

Sigh - Russ57 10:35:47 04/30/07 (1)

Are we talking about shielding in audio amp or video? - cheap-Jack 10:51:50 04/30/07 (0)

OK - So what would you recommend I do? nt - Cut-Throat 07:56:22 04/29/07 (2)

Re: OK - So what would you recommend I do? nt - Dave Cigna 16:42:22 04/29/07 (1)

Thanks! nt - Cut-Throat 04:39:23 04/30/07 (0)

Re: How to wire - 2-24 gauge conductors, with a braided shield for signal wire?...... - beermanpete@socal.rr.com 23:55:35 04/27/07 (0)

Re: How to wire - 2-24 gauge conductors, with a braided shield for signal wire?...... - mg16 15:48:08 04/27/07 (2)

I am not talking IC's here.............................. - Cut-Throat 16:17:14 04/27/07 (1)

Re: I am not talking IC's here.............................. - mg16 11:11:27 04/28/07 (0)

Re: How to wire - 2-24 gauge conductors, with a braided shield for signal wire?...... - Chris O 12:52:11 04/27/07 (5)

Re: How to wire - 2-24 gauge conductors, with a braided shield for signal wire?...... - JANDG 17:44:32 04/27/07 (4)

That won't work - Triode_Kingdom 20:44:15 04/27/07 (3)

Re: That won't work - JANDG 20:55:29 04/27/07 (2)

Re: That won't work - Triode_Kingdom 06:49:05 04/28/07 (0)

This will work - Ron Oehlert 03:52:08 04/28/07 (0)

Follow Ups

Yes, balanced transfer must have a centre-tap ground reference.. - cheap-Jack 12:57:21 05/01/07 (0)