|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: Good article indded, but with some caveats posted by Jacques on April 26, 2006 at 01:26:20:
In my experience anything that involves semiconductors like diodes that has to be individually tuned ceases being individually tuned after a while.Resistors and transformers are more or less exempt from this, but not capacitors.
These things can vary with load, too, and audio equipment, unlike industrial convertors, runs with a very wide load range, from maybe 5% to 100% of load, depending on the input signal and the level adjustment.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Thank you... - real_jj 10:20:35 04/26/06 (3)
- About the very wide load range of PA and switching PS - Jacques 12:42:00 04/26/06 (2)
- Reread and found a typo - Jacques 03:00:14 04/29/06 (1)
- Very minor... - real_jj 12:40:58 04/29/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
