![]() |
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
Register / Login
|
In Reply to: Typical solid state amps have highest distortion at lowest levels posted by Feanor on September 29, 2013 at 05:24:13:
You can switch from pure Class A mode 100% of the time, limiting the output to 35 watts/ch. or to a Class A mode that then switches to Class AB above 35 watts output OR if their thermal sensor indicates that it needs to switch modes.
-RW-
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I believe you are wrong... - rlw 08:03:28 09/29/13 (4)
- RE: I believe you are wrong... - pictureguy 21:30:59 10/02/13 (2)
- Nowhere has your tag line seemed more appropriate than here. - axolotl 22:23:13 10/02/13 (1)
- RE: Nowhere has your tag line seemed more appropriate than here. - pictureguy 09:10:28 10/06/13 (0)
- No: here is what Emotiva says ... - Feanor 08:21:30 09/29/13 (0)