RE: Did it work?

RE: Did it work?

Posted by ejhoove (A) on May 2, 2015 at 03:43:18

In Reply to: RE: Did it work? posted by ejhoove on May 1, 2015 at 02:26:39:

First - Sorry for the double post!

Well it will be a good day! The M60's are driving the Midrange panels, and the Mini's are driving the Riboons. Very fluid and smooth with very good drive and attack while showing no signs of glare or bloat. So far I now understand why many run tubes on their Maggies. I will take today to dial them in level wise, then try and tidy up the wiring tomorrow after church. I'm running EL34 tubes in both amps - JJ Blue Bottles in the M60's and Svetlana's in the Minis.
I'm only using 2 of the 3 A200s, 1 for the subs, and one for the Bass Panels. When I get some muscle to help I'll remove the spare A200 from the stack. I ran the system at a pretty high volume for 2 CD's and the only thing that was more than warm to the touch were the tubes which I did not check. :^)

Regards,
Jim

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - ejhoove 08:46:14 04/25/15 (16)

Did it work? - Satie 16:09:24 04/30/15 (5)

RE: Did it work? - ejhoove 02:26:39 05/01/15 (3)

RE: Did it work? - ejhoove 03:43:18 05/02/15 (2)

RE: Did it work? - Satie 15:13:38 05/02/15 (1)

RE: Did it work? - ejhoove 19:38:13 05/02/15 (0)

RE: Did it work? - ejhoove 16:45:14 04/30/15 (0)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - Satie 09:57:42 04/26/15 (9)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - ejhoove 10:14:23 04/26/15 (8)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - Davey 09:12:40 04/27/15 (5)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - Satie 10:33:30 04/27/15 (0)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - ejhoove 10:29:40 04/27/15 (3)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - Davey 10:54:50 04/27/15 (2)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - ejhoove 14:00:26 04/27/15 (1)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - Davey 18:21:34 04/27/15 (0)

RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's - Satie 08:34:15 04/27/15 (0)

RE: "I have not been able to get the amount of volume out of the riboons with the Mini monos (30w each)" ... - andyr 16:05:21 04/26/15 (0)

Follow Ups

RE: Did it work? - ejhoove 03:43:18 05/02/15 (2)

RE: Did it work? - Satie 15:13:38 05/02/15 (1)

RE: Did it work? - ejhoove 19:38:13 05/02/15 (0)

Post a Message!