|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: RE: Need assistance..... again!!! Thanks posted by atanks on September 19, 2012 at 05:18:25:
I was thinking of leaving the setup as it is, so the DWM would be handling midbass for both the center and the MMG's. The DWM does cross over higher, so it would give you what you want, that is, it would take a load off the MMG's while also handling the center. Then you could use your sub below where the DWM cuts off, 35 Hz or maybe a bit higher if you need higher output from the DWM.
Not only would the DWM be taking the bass and midbass load off the MMG's, it would be reducing IM with the tweeter since it's a separate driver. I know from experience that the MMG's start to suffer from IM distortion when bass levels get too high.
It sounds pretty ideal on paper but you might want to talk to Wendell about what you can expect from a single DWM in terms of levels, to see if it would work in your application.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Need assistance..... again!!! Thanks - josh358 07:52:00 09/19/12 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
