 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.253.101.22
In Reply to: RE: How to minimize the silver wire contact the teflon tube (dielectric)? posted by brainla on January 06, 2011 at 01:48:27
Hi, Google- "Stage III concepts" and you will see how to minimize contact.
Good Luck! Tish
Follow Ups:
nt
Is this what was intended?
Tony Lauck
"Diversity is the law of nature; no two entities in this universe are uniform." - P.R. Sarkar
Hi, Yea, my attempt to add a link failed as I'm not sure how to do it.( I'm not computer savvy) But if you would just Google the words- "Stage III Concepts" and go their website you will see an elegant way to minimize contact between the wire and the teflon jacket.
Thanks, Tish
Stage III concept seems to be work for ribbon or flat sprial cable. How solid core wire employ this concept?
Anyone know how Argento cable minimize the dieletric because they claimed that the material use for insulated the conductor better than teflon, air, cotton, etc. whcih they called "VDM".
Hi again, Someone in this thread mentioned having the silver wire made to be flat by using a pasta machine or have a machine shop do it for you, then you can pearl the flat cable (twist to make a spiral) and slide it in the teflon tube just like "Stage III Concepts" does. Not only will just the edge of the flat wire touch the teflon so that the majority of the silver is sitting in air but, you will also be adding a very small amount of RF rejection.
Good Luck, Tish
Post a Followup:
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
