 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
66.133.245.206
In Reply to: RE: Galileo. posted by Sebrof on April 18, 2010 at 21:11:54
you claim to be scientific. You are applying the exact same principles the Church elders held back in Galileo's day, proclaiming the effect impossible without bothering to check it yourself. You have already come to a conclusion without bothering to do the experimentation. That is simply adhering to hearsay and is most definitely not scientific in any way.
There are many other possibilities including the grain of the fusible material, all of which have a rational explanation. I am not claiming any voodoo effect, but simply pointing out simple rational explanations. Neither am I saying that any possibilities I have raised may totally define the issue. The simple fact that there may be a factor which provides room for investigation. (Don't believe in metal grain structure?, ask any knife maker or sheet metal worker).
It is entirely your prerogative to believe or not to believe anything posted on the internet. When it is stated as an opinion, I have absolutely no quibble about your statement. I find it rather preposterous on your part to state your position as a fact, however, when you have not even bothered to try it nor have you even bothered to explore any rational explanations.
Case in point, I very rarely drink so I can not distinguish between various wines. My inability to distinguish between various bottles does not mean that I do not believe anyone else can, and those who claim to be able to distinguish differences are simply liars and deluding themselves (or drunkards, and have had their senses impaired). So while I can not readily detect differences, the fact that 100s if not 1000s can detect differences does not mean that I do not believe that they exist.
The fact that I can not pitch in a major league setting does not mean that others can not either. The fact is that hearing acuity can vary significantly among human individuals much as any specific physical ability or sensory perception. I would not put down any individual's perception unless I have tried it myself and even then may chalk it up to my own inexperience and lack of practice rather than applying my own limited experience to be the measure of every one else.
In the case of the fuses, I went out and purchased a box of five fuses of the same value to experiment with with a bunch of friends. The owner of the system initially could not hear any difference. The four others present could hear a difference. Three proclaimed the difference definitely noticeable, while the other thought the difference slight. we went through several fuses in that box and came to same conclusion.
That fact is, I had noticed fuses made a difference way back in 1984 or thereabouts. PS Audio had just come out with their big 200 watt amplifier with solid copper buss bars and included special gold plated fuses which had a most peculiar lighting bolt shaped fusible element. Replacement of those B plus fuses created a distinct imbalance in sound if only one channel was changed. It was easy to realize the difference in construction was the cause. (Those fuses are still made, BTW, MTX series IIRC).
Your opinion is yours and you have every right to it. Just please do not be so dogmatic and take the view point of the "elders" in the 16th century where they believed so much in the mental process that they never bothered with experimentation.
Stu
Follow Ups:
If not, read about it here:
http://scienceblogs.com/cortex/2007/11/the_subjectivity_of_wine.php
It'll show you how much your brain will influence your perception. If wine experts can think the exact same wine served in two different bottles is totally different, then you will do exactly the same with fuses. You will be influenced by your knowledge of which fuse you're using and which way you're using it. Your brain doesn't work any differently from mine or those wine experts'.
No matter how one spins it, there is NO WAY one can reliably say fuses have any effect whatsoever if one knows which fuse they're using, and which direction it's been inserted.
Do it blindly and let's see what the results are. As I said, maybe I'm wrong. I just want to be proved I am as opposed to told.
JB
PS: By the way we don't disagree on everything. On top of my list of tweaks is vibration control, which I think is not even a tweak but should be mandatory...
As stated I took a box of brand new fuses and changed the orientation. Did this with two randomly selected fuses from the new box as well as experimenting with the already installed fuse. The observers present could not tell if I had simply removed the fuse and replaced it the same orientation, which I incidentally did, simply to test the hypothesis that the mere removal of the fuse might in some way be cleaning off the contacts from the friction of the removal and thus affecting the sound. The three who could readily distinguish the differences could do so almost immediately every time I changed the orientation. This was in the preamp as the system owner had mono block amps making it more difficult to set up the experiment.
To sum up, the mere fact that you can find studies pointing out that test subjects can be fooled can also be taken the other way: an intellectual block can also create the lack of perception. Logic dictates that the inverse can also be true.
Thus any conclusion drawn without personal experience is void. Taking the stance that I did not do an experiment to your standards and satisfaction, merely points that a simple ten minute experiment is simply too complex for you to try. That in this case is sheer inanity.
To quote Yehudi Menuhin in "The Music of Man" on playing a Stradivarius: "The slightest excess or miscalculation is heard immediately by the player, and if he strays only a shade further off it will be noticed by the audience." Does that mean if the audience doesn't hear any difference, that the sound change does not exist?
When you purchased your roller blocks did you demand scientific proof that a change was effected before purchasing the set? Did the manufacturer present numerical scientific data that the sound wave had indeed changed? I do not believe such data exist, and yet you own a set.
Here is something very easily checked on your own in the comfort of your home and the cost is essentially zero and yet, like others you seem to be afraid of even simply spending a few minutes of trial. I find that refusal to try a simple idea rather perplexing. Is it because it is so cheap, and no large sums of money are being demanded that you refuse? Maybe its like the experiment with the same wine in two different bottles here: without spending money or the perception of spending it, you can not conceive that anything free could make a difference.
Too bad: its such a simple thing to do on your own.
Stu
I'd just like to point out I've answered your question re. Rollerblocks in other posts on this thread. I won't repeat myself. I'll just say that: if you think running a blind test on one's own with Rollerblocks is "very easily checked" and "a few minutes of trial", you're seriously delusional.
If I could I would blind-test myself on them, I apply the same rule to EVERYTHING I try. I said they made a huge difference to me, but until I can prove it with a blind test, that assertion is just subjective talk, virtually worthless.
I've made my point on the issue of audiophile fuses (and their "polarity"). People interested in the debate can read your posts and mine, and deduce what they want from my insistence on blind tests and your insistence on avoiding them.
One thing I'll give you is you're a very smooth talker. A very good quality when one has to explain how he can hear a fuse inserted between the power station and the speakers finally turning the electricity into sound... :))
Ciao!
JB
what the issue is unless you don't have friends. I have used roller blocks, I have used far more ungainly feet systems,including the Simply physics stack,. and have had friends over for true blind testing, But the point is moot as I was really referring to the fuse testing procedure: Being relatively small it is quite easy to perform a blind test and best yet it involves no cost to you other than the time: that's zero cost, nada, absolutely free, but you and the others would rather perform an intellectual exercise rather than to take 15 minutes to try it. My point was that you have nothing to lose in trying it. Frankly I do not believe why anyone should be afraid to try it, unless you want to flip the fuses with the power on.
As to the audibility of a fuse in your power line, I assure you that taking it out without replacement will most definitely make a sonic impact. In fact I have experimented with bypassing the fuses completely which gives the best benefit sonically.
Again consider that a fuse is simply a cheap meltable wire which can barely handle the the current rating it is rated at. It has to build up enough heat to break the connection when the current rating is exceeded, which means the fusible link can barely conduct the current it is rated for. It is the choke point by its very function and nature for your entire power supply.
Stu
Hi Stu,I did test myself with the fuse, that's the point. And yes I have friends, but none who have the slightest interest in audio (at least not where I live), which is exactly why I was asking people here if they could try on their own. I'm just doing here what I would do with friends! Asking "can you hear a difference" within more objective circumstances.
My problem is that most people on forums and in reviews claim they can hear a difference. And I believe that: their brain creates it. What I do not believe is that this difference can be heard in a blind test, and that's why I place such an importance on them. "Thence cometh quiet to the mind", as Roger Bacon would've said!
Anyway, if I understand correctly, you did run a blind test with friends then? You changed the fuse orientation and they identified it correctly, several times in a row, with a negligible margin of error?
If so then you did what I was suggesting and I'll keep an open mind about fuses.
If not I'll stick to my views.
JB
Edits: 04/19/10 04/19/10 04/20/10
I do not consider myself to be a scientist, but these were the following factors we checked in our testing on the orientation of fuses. Bear in mind, we initially experimented using a preamp as the system owner had mono block amps increasing the time necessary for the testing.1. Determine if the removal of the unit's cover affected the sound. It did: removal of the aluminum cover definitely increased the upper frequency content, easily checked by simply replacing the cover without even securing the lid with the screws. Capacitance from the metal cover with the parallel circuit board is the speculation. Later fabricating a plexiglass cover gave the same benefits and dust control.
2. Simple removal of the existing fuse and replacement in the same orientation to check if the act of removal was in some way "cleaning" the fuse holder contacts. No differences were heard.
3. Listening for audible change when the existing fuse was reoriented ( majority heard a change).
4. Checking out a fuse from a new unused box. This happened to be a different brand of fuses, BTW. Differences were heard by the majority, and the orientation was carefully noted. This involved several changes in orientation and the listeners could not see which orientation was involved.
5. Auditioning was further carried forward with a second fuse from the same new box. Differences were noted and the preferred orientation was confirmed to be the same as the first new fuse inserted.
6. Testing then moved to the amplifiers. A quick initial check revealed one fuse to be oriented one way in one amp and reversed in the other. The fuses used were the same brand we had purchased for testing in the preamp. Armed with the knowledge gained from testing the preamp, we reversed the fuse which was not in our preferred orientation. Center focus increased immediately, imaging improved, and soundstaging took on solidity which the system owner, who initially did NOT hear any differences in fuse orientation, commented upon immediately.
7. new fuses were inserted in the amps and the same conclusion was reached as with the preamp again through various swapping of the fuse orientation.
8. I should point out we also ran the preamp fuses for 30 minutes in different orientations after initial testing to determine if break in was not a factor. Maybe half an hour is not enough, though. Since we had a box of five fuses we also started the testing with the fuses in different orientations to make sure that the initial power on did not somehow "condition" the fuse.
But then you are right: The listener's brain ultimately creates all sound perceived. It also is responsible for not recognizing sounds, also. Oliver Sachs has written several books commenting and making observations of the brain ear interface (Musicophilia is one book I highly recommend).
In taking the position that the brain is responsible for misinformation, ie., that any sonic differences are psychosomatic, if you prefer, then by those terms, measurements are totally useless and irrelevant, because every listener's brain would be slightly different. It wouldn't matter that distortion is measured over 10 percent, as some brains may not recognize it.
The value of a Stradivarius should drop to the level of a Chinese made student violin, because I very seriously doubt if even 1 per cent of the average population can hear the difference using a DBT. Reports of humans with perfect pitch must necessarily be a lie and a hoax by your definition unless each person individually claiming such abilities are rigorously and completely "scientifically" tested, as any such claim must be discounted.
There is no doubt that the brain can be fooled. We see it in optical illusions all the time. At the same time, we know of such conditions as colorblindness and it has been determined that the colors involved can vary from a red green blindness to a state where the viewer only sees black and white ( again read Sach's book he Island of the Colorblind). If you are colorblind, and roughly 10 percent of the male population suffers from it, you can rightly make the claim that color perception is purely a state of mind ( which it really is), and that the colors you can not perceive do not truly exist( which it truly does for yourself).
Be careful of world you create. Imposition of your individual perception may work for yourself, but necessarily for others.It has been my experience that hearing, in particular, requires years, if not decades of training (I'm an old man). Taking music courses in high School and college convinced me of that. Aural training was one of the most difficult classes I ever took, but there were students in the class with near perfect pitch who breezed through the curriculum. My dreams of being a music major was dashed by my poor performance in that class. What is fascinating, though, is that I had practiced listening even though I had switched majors and in the course of over a decade or so my hearing acuity increased tremendously, to the point where my high school teacher was impressed that I could hear certain things he had missed in listening sessions (in high school, we had gone to a local audio store to audition speakers, and on one pair, he exclaimed that the G above high C was way too prominent: knowing the techs at that store, they brought a real time analyzer and did a frequency sweep, and sure enough, there was peak at that frequency level).
It is NO sin not to be able to hear certain aspects of music. The sin is the assumption that if you don't hear it, then it is patently false.Stu
Edits: 04/21/10
I'm not saying "if I don't hear it doesn't exist". I'm saying, "make me believe it does".You are also putting words in my mouth. I never said the brain could not be trusted at all. I said the elements that are likely to influence it should be as limited as possible. In blind-testing fuses, the only thing that influences the brain is the fact that you are blind-testing it , i.e maybe making it work slightly differently. But at least other factors have all been ruled out. Which I why I will mostly rely on blind-tests in this hobby, for the most controversial items like fuses.
If you tell me that people were able to consistently determine the orientation of a fuse without knowing which way it was inserted, I have no reason to doubt you and the test you did, and I'll keep an open, if skeptical, mind about the matter. That's all I've been banging about.
JB
Edits: 04/21/10 04/21/10
Now consider this tweak, as it may: totally free. Why would any sane person spend a lot of time and money to irrevocably "prove" that it exists. What is in it monetarily to justify spending a large amount of time, money, and investigative effort to prove something that you have absolutely nothing to gain from?
Consider that in other posts, I have pointed out that there are differences in fuses. Some details in construction are very obvious and so are the time ratings in the case of Slow blow fuses, so obviously there are differences in how the overload currents are handled. Taking the inverse of your attitude, prove to me that these differences can not alter the current being passed through them and thus affecting sound quality.
Stu
Stu
you're just transposing your experience onto everyone else's. I believe the testing I had conducted was far more rigorous than most experimenters. The fact that I had four other listeners other than myself speaks volumes, particularly when I had already stated one could not hear differences till the very end and another who could hear differences, thought them negligible.
Stu
"you're just transposing your experience onto everyone else's"
Of course I am, Stu.
But then so are you. I can produce as many friends who will swear there is no difference then you can show me people who said there were in your own test.
In any case, as I said above, I consider your test and methodology satisfying, at least enough to make me keep an open mind on the matter.
JB
Post a Followup:
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
