![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.27.41.140
In Reply to: RE: Thomas stereo organ amplifier 6973 to 6cz5 conversion posted by Tre' on January 16, 2022 at 06:29:48
I had a conversation about this with someone last year. It was (and still is) my contention that "grid leak" is a misnomer unless the resistor's value is so high that grid leak bias is produced. But wouldn't you know, in the course of researching this further after the fact, I proved myself wrong. Don't remember the source now, but I came across an instance of a tube manufacturer using "grid leak resistor" for a simple, low value grid resistor to ground. The reference was from the '60s or earlier. Go figure.
--------------------------
Buy Chinese. Bury freedom.
Follow Ups:
The problem is newbies arent about nuances of expression juggling by experts. They see a resistor going directly to the grid so think people are talking about this when they refer to "grid resistor". You have to go back in thinking to the time you didnt know what the differently positioned resistors were about and then consider how to talk about them so the ignorant dont mix things up. Because they do mix them up which is the point! Not which expert uses the cleverest name.
A grid resistor implies fundamentally different functionality than a grid leak resistor. Skewing the meaning of technical terminology to suit those who don't understand it does everyone a disservice.
--------------------------
Buy Chinese. Bury freedom.
I can already see some pretty steep price increases for the 6cz5 on the bay!
For those that read this post looking for some help here it is..
In cathode bias a small value resistor is placed between the cathode and the ground so it develops negative voltage on the cathode thus achieving bias. In fixed bias a separate circuit provides negative voltage to the grid of the power tube and the cathode is simply grounded.
In cathode bias a small value resistor is placed between the cathode and the ground so it develops ***positive*** voltage on the cathode thus achieving bias. The grid is at zero volts DC and the cathode is at a positive voltage so the grid is negative with regard to the cathode. That is what bias is, the grid being negative vs. the cathode.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
![]()
New choke!
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: