![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
198.53.34.23
In Reply to: RE: Pin 2 is ground posted by Victor Khomenko on June 24, 2024 at 15:36:07
Using the 5-pin din to RCA female jacks work. Soundwise, I will have to evaluate it further. It's a new cable so it'll require a little bit of breaking-in, but from what I've heard so far it has more resolution than the sound coming out using the regular PR99 xlr output jacks.
Thanks for the tip...
Follow Ups:
Observations?
![]()
20-foot run RCA interconnects as the Revox PR 99 MKII is about 13 feet or there about away from the pre-amp. The sound was great with lots of resolution but the highs were a little spitty for my taste. So I decided to experiment with the interconnects by replacing them with 20-foot run NBS XLR cables that I have lying around. The sound is much more organic and well-balanced devoid of electronic hash.
I compared the regular configuration where I was using the normal XLR output vs. the DIN output back and forth and found out the DIN output is much more fluid and very transparent in delivering the music. As you said, by using the DIN output the signal will be routed away before it hits the output board in a way what I'm hearing is the signal from the tape heads with minimal interference. Am I correct in this assertion?
It opens up, gets more air.
![]()
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: