|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
75.69.134.157
In Reply to: RE: historically it was the default! posted by hahax@verizon.net on December 20, 2023 at 11:04:36
I can tell you empirically (only) tha the rolloff is smooth. XO on the "Burhoe modules" was first order on the tweeter (only) with a 10 uF capacitor (nomiunally 1800 Hz). I didn't calculate the XO frequency, it is from the link below, and may not be accurate. :-p
all the best,
mrh
Follow Ups:
Someone's measurement of the same woofer in the slightly larger EPI 110 enclosure. Not exactly what you're looking for (and, obviously not a laboratory measurement, nor a modern "spinorama"), but at least a little data to support the subjective impression (and the prevailing wisdom) about these drivers. HTH!
For reference, here's a photo of one of a pair of EPI 110 with woofers hich I re-surrounded with generic (three dollar) surrounds.
Proper replacement surrounds for these woofers are available (from Rick Cobb, e.g.) and are well worth the additional cost (still quite reasonable, less than $30 the pair).
Here's an EPI 100V that I re-surrounded with Rick Cobb's surrounds. The performance of this woofer should :) pretty well match the original performance.
I kept the 100Vs. Everyone should have a pair of these for reference, I'd opine :) They're epochal, and they don't take up very much space!
all the best,
mrh
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: