 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
97.89.27.103
In Reply to: RE: Still an error posted by aljordan on December 20, 2009 at 10:02:25
When I select connect, under the alsa tab I see 14:Midi Through under both inputs and outputs.
The output is red and the input is green
I sent you a pm
Music is the Bridge between Heaven and Earth - 音楽は天国と地球のかけ橋
Follow Ups:
dear dynaudio & aljordan
I´m, sorry to say, still not really convinced about JACK.
-as mentioned I´m grateful for the abilities Jack provided when I needed it, but I still think it´s an awful complicated application.
sure, it was written for linux and adapted to windows....nevertheless it´s a pain in the A... to work with, and I´m not quite sure why I did it so much waste of time.....eh, maybe because I had to !
if one really have to use JACK it´s mandatory to make very precise configurations and back them up with a disk-image.
runtime errors with almost every dot or paragraph change....it´s really only something for developers !
-and for high-end audiophiles it will just add too much processor "hash"
You really should differentiate between Jack on Linux and Jack on Windows. I haven't really spent time comparing Jack output on Linux to other output capabilities on Linux, but in my experience Jack is rock solid on Linux with good sound.
Alan
hey aljordan,
I do not hope I gave the impression that JACK is useless in even fairly advanced systems.
on the windows platform JACK requires an additional C++ code and THAT might not be very "runtime" friendly. I have realized combining cPlay ASIO with allocator VST through JACK, and I´ve been very happy with the result (possible even @192kHz sampling rate).
as we all know, less is more - and in this regard it was clearly beneficial for my system to get rid of JACK.
but even the most hardened PC freak must admit that JACK is not straight down the line to configure correct....
kind regards
If you are trying to get output via a Firewire device, you don't do anything with ALSA because it won't support the Firewire devices. You should be looking under the "Audio" tab in the "Connect" window, not the ALSA tab.
In particular you should be seeing if there is anything under "Writable Clients / Input Ports" where you should see a "System" fold-out. If your device is recognised, it will show at least two ports under "System", however, if it has 8 channels, you would see eight ports or more.
Post a Followup:
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
