Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

Return to Planar Speaker Asylum

Planar Speaker Asylum

RE: Magnepan center CCR & CC flawed design

64.252.2.173

In Reply to: RE: Magnepan center CCR & CC flawed design posted by marty1675 on September 18, 2010 at 15:48:21

Well, I don't like to second guess the designers without good information on the trades they faced, such as perceived image height (the closer to ear level the better), lateral dispersion, and dipole cancellation, as well as an understanding of the anticipated market. And if I had to accommodate a plasma or LCD, I'd just use a taller stand.

None of which of course applies in your situation, or to that of others who have rear projection sets. Since you do have reason to use your center channel, it seems to me that your best option would be the bass rerouting one. How much does the base cost? If it's $1600 like the Maggie woofer, an electronic bass routing solution would cost less.

Follow Ups:

RE: Magnepan center CCR & CC flawed design - marty1675 16:55:14 09/18/10 (2)
I can only report that Wendell did not raise any of those issues about lateral dispersion, etc. He had simply *not* considered that the height of both the CC and CCR would not work and was surprised to hear that.

And, again, this applies to almost all 60" flat screens AND rear projectors. I believe most people would use a stand of less than 32" for a 60" TV regardless of the type -- for the same reason that manufacturers put rear projectors on stands are less than 32"

This is only a difference of 8" at most. But those 8" matter for 60" TVs. Look at the photo of the CCR and CC on the web site. By simply making the CC stand wider, they could have easily reduced the height by that amount. But, based on my conversation with Wendell, Magnepan never even considered it.

Not sure how much a bass router would cost. I'd prefer to just use my Lexicon MC12HD. I can't comment on whether other high end processors work like the Lexicon, which rules out the precise bass management suggested by Magnepan.

My view is that Magnepan has cost themselves a significant market share by virtue of a design that is about 8" too high. They will eventually have to correct it. I will wait and use my Martin Logan center in the meantime, however long that will be.

Others in the same situation should look at other centers such as Martin Logan.
- RE: Magnepan center CCR & CC flawed design - IEaudiodude 21:33:50 12/30/13 (0)
  Rear projection ???? People actually still use those ? And stands ?? What are those for ? I thought adjustable wall mount brackets were what people use in 2013. I did see a place that still carries rear projection Mitsubishi stuff, but they are still to damn big and take up way to much space compared with a flat panel on the wall.Come to think of it I don't think I know anyone that has rear projection these days. I think the center channel problem might affect about 0.5% of HDTV owners so Magnepan has it about right. IMHO as always :^)
- RE: Magnepan center CCR & CC flawed design - josh358 18:10:44 09/18/10 (0)
  You could use an active crossover and a couple of resistors. Or throw together a passive one. Kludgy, I know: Lexicon should just direct the midbass from any speaker set to small to the front speaker on the same side if that speaker is set to large, or both front speakers in the case of a center speaker set to small. That they apparently don't seems to me a design oversight on their part.

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors: