Welcome! Need support, you got it. Or share your ideas and experiences.
Return to VK Music - Elekit & Triode Japan Forum
14.3.173.41
In Reply to: RE: 240hz hum through left channel posted by vkung on September 05, 2016 at 19:11:57
Thank-you
I will replace Q3 and Q5 with 02N60Z
Is there a specification for Zenner Diode, in assembly instruictions it is only refered to as Zenner Diode with no more detailed information.
Follow Ups:
YOU DON'T NEED TO REPLACE THE DIODE.
I have replaced Q3 (did not replace diode)
Still getting hum occuring on left channel.
Also re-soldered every connection. Should i Also replace Q5?
CHECK THE VOLTAGE AS PERV Page 19
All points voltage checks ok
Any other tips?
where you bought your kit?
99% is the soldering issue..
Dear Sirs,
I removed all components related to power filter, added new FET for Q3 / Q5, and resoldered everything. HUM is solved.
Thank-you for your help.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: