![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.118.107.235
On Plinius, flip the switch to class A. Wait for warming up half an hour. The sound becomes very analog and full body. The soundstage is 3D and huge. The sound is so pretty. Better than the $300K system I heard.Associated equipments
Analog source: LP12
Digital source: Rotel RCD-855 + Denafrips Pontus II DAC
PreAmp: Conrad Johnson Premier 17LS2
Power Amp: Plinius SA102 125W Class A/AB
Speakers: B&W 801 matrix S2
Edits: 02/01/25Follow Ups:
A friend of mine has this amp and yes, Class A (this is a true Class A btw. referencing the discussion above) sounds very nice with this amp...at least compared to other SS amps, especially other Class AB amps. AB mode is really only for standby so the amp doesn't have to warm up from cold, which will take quite some time to sound good.
You put this amp on a sensitive speaker though and a good SET will sound much better...everything you say about this amp is enhanced significantly with a good SET.
SET is single end class A in triode mode.
Edits: 02/11/25 02/11/25
![]()
There is a switch between class A and class AB.Class AB for background music and class A for critical listening.
There is also a timer which will switch from class A to class AB automatically if there is no music for certain programable time.
These features make the amp very flexible.
Plinius amps are very reliable among the best.
Edits: 02/05/25
Power amps, from the Edge M8, Latino VTA-120 Tube amp, to my latest addition the Nilai DIY 500 Monoblocs.
I want to hurry up and finish my DIY 2 way horn speakers with QSC Waveguide with Radian 475BP drivers and MCM 55-2963 15" woofers. See how the Nilai's work with these speaker.
How do you like your Crown XLS 2502?
is nice but needs a lot of break in to sound its best but its not at the same level with my other amps. I use it in my second system.
I will try to post pics of my system soon, just really busy since going back to work.
Heat, I'm going to worry about heat?
The Plinius can output 125W. 100W tube or SS class A is a sweet point. The heat is about 500W. Not terrible bad.Of course you can't run class A or tube on a space shuttle where class D has its advantages.
Edits: 02/04/25
We have a small electric bedroom space heater that puts out 500-Watts of heat on it's Medium setting. Are you telling I can put the Plinius in the corner of our room instead to keep it nice and toasty at night ? A tube amp would at least double as a night light!;-)
Edits: 02/04/25
mine idle at 300W each. :)
had a wonderful time.
class A. 500W @ idle.
![]()
"500W @ idle."
I'd be afraid to leave that amp ON unattended.
![]()
There is a switch between class A and class AB.
Class AB for background music and class A for critical listening.
There is also a timer which will switch from class A to class AB automatically if there is no music for certain programable time.
These features make the amp very flexible.
Plinius amps are very reliable among the best.
"There is also a timer which will switch from class A to class AB automatically if there is no music for certain programable time."
Now THAT is a smart feature !
![]()
I agree with you, I'm waiting for the enough money to resurrect my Kinergetics Class A amp S.S. I bought here on the asylum used, that someone else repaired for Teresa (past reviewer). Too bad the person didn't know what he was doing and was a magnitude off on the biasing by a factor of ten.
So re-biased properly, it really sounded great with my Quads and woofers. The low-end was the best I heard on my system, a big, tight, womping thing with far more that 75 Watts (150 into 4) would suggest. Highs were delicate and smooth. Doubles again into 2 ohms.
Ran very WARM and I mean very. "soundstage is 3D and huge".
Maybe it's time to get it going again, I have all the parts
But I've come to realize that what is important is if the amp sounds like music. The class of operation has nothing to do with it. Its all about competence and finesse.
The Plinius itself suggests otherwise. This amp sounds like a completely different beast when biased Class A vs. when it is biased as Class AB. It is SO much better in Class A that it sounds like a different amp, which of course it is not.
All things being equal (and in the Plinius it is equal), the bias, and therefore the Class of operation, impacts the sound greatly.
The Plinius itself suggests otherwise. This amp sounds like a completely different beast when biased Class A vs. when it is biased as Class AB. It is SO much better in Class A that it sounds like a different amp, which of course it is not.
All that says is that amp is better in class A. It doesn't say anything other than that.
Now if you could show that in all cases amps sounded better in class A, you'd be on to something.
I'm not denying this is a factor. But its one of many and especially if feedback is involved, likely not paramount.
There are a lot of other factors involved such as power supply design and execution, quality of parts used, design of the feedback network (which isn't trivial) and so on. Pointing at one design characteristic and proclaiming it to be 'the one' as proof of an entire concept across thousands of designs is just that- pointing, but not proof. Its evidence only.
For cutting through B.S. in the same way that a hot knife cuts through butter...
I hate to disagree. But any audio product should sound like the input if it's high fidelity. Other wise it's colored badly. And I know for a fact that that kind of musical approach is what bothered Gordon Holt at the end of his life. He believed in fidelity not musicality.
We're on the same page. If its neutral it will be musical.
If it sounds like electronics rather than music its not neutral. IOW this is a matter of semantics; I think we agree on the goal.
How odd! If you want your kit to deliver sound in any other form than "music", you are clearly less interesting in music than in technical goggledgook!
I'm with Ralph - it doesn't matter a jot how your amplifier does its very simple job (to amplify an audio signal to the level that the speakers can do their work) as long as it still sounds like the music you heard in the concert hall.
The excitement factor of live recordings is so often lost by many amps of all classes, so it's important to home demo a selection before finding the amp that best matches the rest of your system and the room it will be working in - irrespective of class.
The problem with a 'musical' system is that yes it almost always sounds 'nice' no matter the input but the great recordings' reproduction are cheated.
The Room 3 systems were most certainly musical but laid bare shortcomings in recordings. I enjoy the music of Dead Can Dance , but at Sea Cliff they were immediately rendered dimensionally flat. No depth of field.Painted boats on a painted sky.
Edits: 02/09/25
I don't want the system editorializing if there's a bad recording. I want it to show off what is good along with the bad.
If it's 'nice' all the time I don't regard that as musical. So a difference of semantics I imagine.
I'm guessing that Holt believed in the "musicality" of musicality in musical recordings...A different thing than believing in the "musicality" in (or of) certain types of hifi components ?
Edits: 02/04/25
I hope the sound isn't pretty on almost everything. Then it's a 'musical' coloration. Sometimes the extra headroom of AB is worth some loss of low end linearity from class A. It depends on the system and the input.
Your speakers and equipment have to up to certain level including cabling to tell the differences. On my Plinius there is a switch between class A and class AB. There is no comparation between class A and class AB. Once I listened to class A, I never want to go back to class AB. Too bad I can't listen to class A all day. Too much heat and electricity.
Agree. In my setup years ago the Pass Labs 150.5 AB was noticeably better sounding overall vs the purely Class A Aleph 3. As you said, "it depends".
![]()
By better I mean cleaner detail and transparency, deeper, more articulate bass, crisper dynamics. Is there anything else that matters?
Granted, the Purifi amp mercilessly reveal recording defects but good recordings come thru in all their glory.
![]()
Dmitri Shostakovich
They're very different amps. The 150.5 are bridged SETs(single ended transistors) which effectively gives the advantages of both. The 30 is purely single ended which is inherently non linear(which Nelson Pass acknowledges) in what I consider a bad way, it amplifies the negative half of the signal differently than the positive half.
I have had the Aleph 3 and Aleph 30. Both were warm, but sounded a touch syripy. I have a little 30 watt AX30 Pass amp. Way cleaner, and more powerful. The 150.5 should easily sound better than those old Pass Pure A amps
And what you said supports my assertion that Class A is not universally better sounding than other classes of operation. It depends on the amp. Some Class A are excellent, others not so much. Which can be said of Class AB too.P.S. I had the Aleph 3 and the 30 too. Neither were very good unless you like that syrupy warm, smooth, slightly veiled sound, with rolled off frequency extremes, and very polite dynamics (no punch). Yet people rave about these amps because they're supposed to since they're from Nelson Pass. I scratched my head and said WTF [What's the Fuss] ?
Edits: 02/03/25 02/03/25 02/03/25
Your first sentence sums it up - it matter not what Class an amp uses, but the end result.
In my multi-amp home listening phase about 4 years ago (after deciding to move away from tube amps) I bought or borrowed Class A, AB and D amps in the 3-8K GBP price range. One of the Class A sounded great (Accuphase) but another (Sugden) sounded about as dull as any other amp apart from a Quad and (to my surprise and disappointment) the Benchmark that was so raved about by a fellow Avantgarde speaker user.
In the end, the choice was between the Class A Accuphase (a little too "polite"), the Class AB GamuT (great sound, but a bit naughty when powered up or down), or the Class D NAD M33. I chose this last amp (no regrets after 4 years), but have recently also bought Atma-Sphere Class D monos.
It's what they sound like that matters, not how they do their job.
tube -> class D
That was a big jump.
I went from a pair of lovely sounding Manley Neo-Classic 250 tube amps, 10 EL34 tubes per monoblock. Wanting to no longer deal with the heat, weight, and tube replacement costs I investigated various Class D amps. I went through a few Class AB solid-state amps too but over time I noticed that Class D amps were improving. The other more 'traditional' amps had already plateaued. There was nothing new there except even more creative hyperbole in the marketing literature. Anyway, fast forward a handful of years and I too wenttube -> class D, and with no regrets.
Repairing and retubing the Manley Neo-Classic 250 monoblocks
![]()
![]()
![]()
Tried a couple big boy Bryston amps. Big boy mistake.
![]()
Manley tube monoblock & Wyred4Sound SX-500 Class D monoblock.
![]()
The Wyred4Sound Class D was very good but not quite there. However, I'd take these Class D monoblocks any day over the
Brystons. This was 14 years ago! Class D has improved noticeably since then. I'm sold.P.S. I was running Thiel speakers back then and they required big power to sound their best.
Edits: 02/04/25 02/04/25
Pity, it looks like you once had a good sounding system (minus the atrocious sounding Brystons)...then you went cheap.
...but I didn't sacrifice on SQ ;-) I enjoyed those Manleys but I'm digging Class D lately.
Yeah, I hated those Brystons. They were a major mistake on my part but live and learn. I think I told the story of trying different tube preamps with the Brystons to make them sound better. Nothing worked so got rid of them. Some folks like them but they're not for me.
![]()
.
.
![]()
Funny, your description of these two amps is exactly the same as mine. Not sure if "syrioy" is a real word, but that is what I heard. I bought the 30 as I was unhappy with they first one. Same results. But they both were praised in the rags. They reminded me of old tube sound before tube sound was refined.
Edits: 02/03/25
Interesting. I had the Aleph 3 and bought the Aleph 30 thinking it would be better but as you said, they were the same lackluster amps. The Aleph 3 would at least double power into 4 Ohms while the Aleph 30 would not.These were supposed to sound good. They're from Nelson Pass after all. But I thought they were pretty lame.
Aleph 3 :
30wpc 8-Ohms
60wpc 4-Ohms
Idle power consumption: 250-Watts from AC mainsAleph 30 :
30wpc 8-Ohms
50wpc 4-Ohms
Idle power consumption 200-Watts from AC mainsMy repurposed Pass Labs Aleph 3 Class-A amp
![]()
Edits: 02/03/25
As these are single ended, you probably didn't use a proper high sensitivity, easy to drive speaker.
I don't know what's wrong with Pass Labs class A amps. On my Plinius amp, there is a switch which can change between class A and class AB on the fly. Both classes can output 125W. In my system, class A sounds very noticeably better than class AB. No question about.
Define better. We all have personal tastes. I hope not to hear musical. That's a non answer. High fidelity isn't musical ; it's supposed to be accurate. The question in an audio world with imperfect devices is what compromises to make to come close to accurate. Is it frequency? Is it dynamics? Is it distortion? It's all the above and balancing them to some degree varies with each individual. I recall David Berning showing me an amp with variable feedback that sounded better the higher the distortion because the dynamics improved. Oh and the amp was almost pure class B.Your particular example of class A may be right for you. I'm not sure it is universal.
Edits: 02/02/25
He is right, it is much better in Class A. A friend of mine has this amp we have tested this extensively. The Class AB, is a little hard, a little bright and soundstage and imaging flatten out considerably. Tonality in Class A is closer to right than I have heard from nearly any other SS amp. It doesn't sound slow or "fat" in Class A, just more tonally right. Soundstage gets dimensions that don't exist in AB.
You need a reference. Otherwise you will get used to class AB and forget the sound of class A.
My Plinius can output 125 class A watts at 8ohms. It can drive most speakers. When you have a chance to listen to one of the Plinius class A amps, I bet you will like them.
I think I can probably get the performance of Class-A by listening to a pair of STAX electrostatic headphones. I own the top-of-the-line SR-X9000 headphones amplified by the SRM-700T driver unit. These STAX headphones represent the best sound I've ever heard, and they're rated "A+" in Stereophile's Recommended Components. However, I still enjoy listening to my Magnepan speakers powered by Hypex Nilai 500-watt monoblock class-D amplifiers. In fact, I enjoy listening to my Mini Maggie speakers just as much.
Go figure!
...and mind breaking for some.There was a time when audiophiles were brainwashed into thinking Class A was always best and that may have been the case in grandpa's day. Times have changed but some audiophiles never do ;-)
Did you sell your PS Audio M1200 Class D monos?
Edits: 02/07/25
The main reason I switched to class-D amplifiers is because I didn't want to spend the money for class-A or even class-A/B. When I saw the PS Audio M700 monoblocks rated Class "A" in Stereophile's Recommended Components, I decided to give them a try. However, PS Audio convinced me to wait for their new M1200 monoblocks by enticing me with a 25% discount. When I finally received them a couple of months later, I was absolutely amazed at their sound quality when driving my Thiel CS3.7 speakers.
The M1200's also sounded great with my Mini Maggie speakers, but I didn't think I needed 1200-wpc, so I took a chance on the Hypex Nilai 500 monoblocks, again because they were cheap at only $995 each. To my surprise and amazement, the Hypex Nilai 500 monoblocks sounded just as good if not better driving my Mini Maggie's.
To answer your question, "No, I haven't sold my PS Audio M1200 monoblocks."
It seems I rarely sell anything anymore, although I did sell my SOTA Millennia turntable. Anyway, I still have my Thiel CS3.7 speakers, so I'm also keeping my M1200 monoblocks. I'm giving them both to my son as soon as he gets moved into his new place.
Happy listening!
John Elison
That's pretty high praise for the Hypex Nilai 500's if you place their SQ right up there with your M1200's. Your son is going to have a wonderful sounding setup!
![]()
Class A is not universally 'better'. Similarly triode mode on many tube amps isn't universally 'better' than ultralinear.
![]()
The bias for UL is very high. 60% of class A for example 6550. On the other hand the class AB for SS is very low. Nobody ever used 60%.
I strongly recommend that one should check out Plinius class A amps before giving any assessment for the amps.
You've proven one thing. You prefer Plinius amps in your system. The best system I've ever heard was all class D amps. And it was DIY.
Happy?
non answer since I didn't come close to saying that. Plus probably to make things worse the entire system is digitized including speaker control and room control. I'm just saying an audio system is a system and you're auditioning the integrated total and that's what's good(or bad).
Looking at his other posts on the topic I think he's saying what I am basically saying:
- Class A as group is not universally better than other classes of operation.
- He prefers his Class D amp. I'm liking mine too.
But that's not to say Class D is universally better - "it depends".
![]()
Digital signal is sampled from analog signal. It can be very close to the original signal. However saying it is better than the original is kind over stated.
"Digital signal is sampled from analog signal. It can be very close to the original signal. However saying it is better than the original is kind over stated. "
No one in this thread, not even me, has said or implied that.
P.S. BTW Class D is not "digital"
![]()
Well, I'm not biased in assessing the sound of an amp based on how it is biased. If I were, I probably wouldn't be enjoying my Class D amp as much as I am.;-)
I'm sure the Plinius is a wonderful sounding Class A amp. Same for some Pass Labs, Coda, Accuphase, Luxman, etc. But IMHO Class A amps have a certain appeal to old school thinking.
Edits: 02/02/25
"a certain appeal to old school thinking". And what is the matter with that? Hunh, hunh, hunh? -)
LowIQ
highIQ
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: