|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I can't remeber where I saw the instructions of how to DIY a Symposium platform clone so I had to do this from memory.
I have 2 pieces of 3/4" thick MDF between which I will sandwich a 1/2" thick sheet of styrofoam. The part I didn't recall was how thick the aluminum top and bottom plates have to be for these platforms. Since MDF can warp, I'm assuming that the aluminum sheets are for structural integrity. Unfortunately, aluminum starts becoming *really* expensive at anything greater than 0.1" thick. Does anyone have insights?Any advice (and or photos) would be most appreciated.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Help with DIY Symposium platforms - illini_skn 11:59:15 03/04/03 (16)
- sorry can't paste photo to here. nt - dave c 21:05:39 03/05/03 (0)
- Re: Help with DIY Symposium platforms - DSK 00:20:26 03/05/03 (10)
- Where can one buy PE foam on line? I assume Polyethelene (nt) - NuTube 14:35:41 03/06/03 (2)
- Try www.foamorder.com nt - Martythomas 10:05:43 03/07/03 (0)
- Re: Where can one buy PE foam on line? I assume Polyethelene (nt) - DSK 17:32:28 03/06/03 (0)
- Re: Help with DIY Symposium platforms - David Aiken 13:36:05 03/05/03 (5)
- Re: Help with DIY Symposium platforms - DSK 17:04:54 03/06/03 (1)
- Re: Help with DIY Symposium platforms - David Aiken 22:26:29 03/06/03 (0)
- good points, but.... - sunnysal 06:56:11 03/06/03 (0)
- Re: Help with DIY Symposium platforms - DSK 16:48:30 03/05/03 (1)
- A bit of confusion - David Aiken 23:09:16 03/05/03 (0)
- Re: Help with DIY Symposium platforms - sunnysal 13:05:04 03/05/03 (0)
- Re: Help with DIY Symposium platforms - Julien43 20:41:27 03/04/03 (0)
- maybe - dave c 14:15:36 03/04/03 (2)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
