|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Marantz CD4000 Crystal Clock posted by binatang on April 30, 2002 at 02:01:24:
remove the torx screw (size 5? - I used an awl to get this out). The pcb is then held by plastic lugs on the casing which is easy to manipulate out but be careful - laser is connected to pcb by cable. I have not tried to disconnect the acble as it is very flimsy.This does not give much clearance for the work of changing the clock - I have not done this yet but intend to use the Kwak clock schematic - is this your approach.
Also I am looking into some way of changing the SAA7372 decoder and filter to non-oversampling - need a service manual to get further - if u have one would appreciate some pages copied.
Look at http://www.decdun.fsnet.co.uk/project.cd.html for full details on Philips CD713/723 tweaks - same as Marantz CD4000.
Let me know how u get on
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Marantz CD4000 Crystal Clock - jkeny 10:30:13 04/30/02 (6)
- Re: Marantz CD4000 Crystal Clock - binatang 13:45:40 04/30/02 (5)
- Re: Marantz CD4000 Crystal Clock - Jkeny 12:48:35 05/01/02 (4)
- Re: Marantz CD4000 Crystal Clock - binatang 20:05:42 05/01/02 (3)
- Re: Marantz CD4000 Crystal Clock - binatang 01:05:06 05/02/02 (2)
- Re: Marantz CD4000 Crystal Clock - jkeny 03:50:10 05/02/02 (1)
- Re: Marantz CD4000 Crystal Clock - binatang 19:35:05 05/02/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
