|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Gorilla glue does look good... posted by Ortem on October 29, 2001 at 17:50:01:
Gorilla glue is expensive, $14 per 8 ounces in the US.
It expands a lot and dries to a dense foam. Just scrape
it off after it dries and sand. It is easy to sand and
does not clog sandpaper and does not dull cutting tools.
I use it for most of my woodworking projects. I used it
to glue 1/2" Corian to make a turntable plinth and then
trimed the edges with a router bit. I used about 15
Bessey K-Body clamps for this project. The more more
clamps you use the betterIf you do use it read the tips at the Gorilla site.
Do not let it get on your hands and put some paper down
to catch the excess that will be forced out by the clamps.
It is very sticky when wet just let it dry and scrape it off.
If you get it on your tools or clamps don't wory about it,
just scrape it off when dry.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Gorilla glue does look good... - Jerry P 06:10:10 10/30/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]