|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Surface treatment of MDF??? posted by Granholm on February 5, 2001 at 05:14:25:
I just finished building my Salamander clone shelving with mdf. I was able to buy mdf veneered with Cherry. Needless to say it looks very nice, tung oil finish and then a coat of nice wax. Edgebanding that was pre-glued worked beautifully. Made speakers a while back from the same stuff, went out and bough 1/4" rounded moulding and left the corners open, that handled the edges on the speaker. All the stuff had to be bought at wood specialty stores, not HD or Lowes. Check with your local woodworker's guild, they may have recommendations on where to find stuff at a good price.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Surface treatment of MDF??? - Imoer30 15:01:22 02/05/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
