![]() |
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Yes, you have mixed 2 different designs posted by David Aiken on November 9, 2010 at 23:11:10:
Hi David:
"the bolt only goes through the bottom layer and the higher layers sit in the middle between the bolts."
If I do that then there will be about a 1" gap from the the higher layers in the middle on the inside of the threaded rod to the outside of threaded rod to the edge of the bottom layer.
I think just making the higher layers with a bigger hole for the rod + nut + clearence might be the way I will go.
I should have posted about my plans and got some help before I picked up the materail. Oh well. :O)
Thanks for posting and provideing more info.
Ken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Yes, you have mixed 2 different designs - benie 01:59:35 11/10/10 (1)
- RE: Yes, you have mixed 2 different designs - David Aiken 11:14:49 11/10/10 (0)