Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

I will try multiple combos

I have an array of silver mica values on order, and I already have .01uF and .001uF Multicaps on hand. I have lots of different values of PRP resistors, and I just ordered some 71ohm Texas Components TX2575 Z-foil resistors as well, to match the characteristic impedance of my speaker cables. Texas Components will make any value of resistor you want at no extra cost, but the resistors are pricy (~$10 each), so multiple parallel arrays can get $$$ fast!

The Z-foil resistors are especially well-suited to this job as they have a very low self-inductance. I measured a 100ohm PRP resistor at 10kHz and found 3.3uH of inductance, meaning the 100ohm PRP thus has a -3dB point of only 4.8MHZ. Since I'll be using a value of 71ohm, this could be a significant issue.

I'll post my results when I'm done - it will take 2 weeks for me to get the TX2575 resistors.



Edits: 04/26/10

This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups
  • I will try multiple combos - Maxamillion 08:30:32 04/26/10 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.