I should add that the Siltech designers worked to achieve a 45Âº angle. nt

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Follow Ups Full Thread

Topic - Any tips on twisting a pair of 12 or 10 AWG solid wires? - Christopher Witmer 06:46:04 06/03/09 (9)

Benefits Of Twisting/Braiding....Lower Inductance??? - Dynaudio_Rules 03:50:09 06/04/09 (2)

No, but it increases noise rejection. - Al Sekela 14:51:36 06/06/09 (1)

Thank You Al...!!!....nt - Dynaudio_Rules 15:07:39 06/06/09 (0)

tip on twisting wire - Patrick Kopson 08:17:11 06/03/09 (5)

I usually do about 1 twist per inch - Dynaudio_Rules 12:54:16 06/03/09 (2)

RE: I usually do about 1 twist per inch - JoeKool 21:29:45 06/03/09 (1)

Your Right....I did a 12ga Coax recently, it was every 2" - Dynaudio_Rules 03:49:01 06/04/09 (0)

Shortening depends on the angle of the twist. Use HS geometry to figure it out. Do a 45Âº angle. nt - Norm 08:33:19 06/03/09 (1)

I should add that the Siltech designers worked to achieve a 45Âº angle. nt - Norm 06:26:09 06/04/09 (0)

Follow Ups

I should add that the Siltech designers worked to achieve a 45Âº angle. nt - Norm 06:26:09 06/04/09 (0)

Post a Message!