|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Where to get spikes? posted by vinylbee on October 13, 2008 at 12:25:40:
My kinda guy. Try out Hilti and look for a 3/8-16 stud that is "shot" into concrete or steel. Keep in mind Hilti is pricey and the same item from others is cheaper. It should get you looking in the right area. I loctite a wing nut on top, drill and tap the base, then use a hex nut to lock it in place. Figure between $1-2 for stud turnkey.
For larger threads, like 3/4", look for a General brand plumb bob. Unscrew the top and re-tap. That will cost a bit more.
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- So you want cheap and 3/8" huh? - Russ57 18:03:23 10/13/08 (1)
- You can buy just the plumb bob tips at many hardware stores - Slider 19:21:47 10/14/08 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
