|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I have to desolder the four motor contacts from under this PCB
and resolder the new motor
Can anyone with experience doing this point me toward the best materials and tools to do it properly? Its a Pamasonic DVD player.. I bought a new motor but was unaware I'd need to take these steps..
This post is made possible by the generous support of people like you and our sponsors:
Topic - Soldering job advice needed - ArdRi 17:08:52 10/03/08 (9)
- RE: Soldering job advice needed - wheezer 20:06:44 10/04/08 (0)
- RE: Soldering job advice needed - RioTubes 12:47:03 10/04/08 (4)
- Thanks for the tip but its not possible - ArdRi 12:59:24 10/04/08 (3)
- RE: Thanks for the tip but its not possible - rick_m 14:39:38 10/04/08 (2)
- its all moot now. I reassembled the piece and.... - ArdRi 15:06:19 10/04/08 (1)
- RE: its all moot now. I reassembled the piece and.... - rick_m 07:21:44 10/05/08 (0)
- Get some of this stuff - snert 19:23:04 10/03/08 (1)
- Works well; use at least a 40w iron for heavy tabs. ~t - mpathus 16:59:09 10/04/08 (0)
- RE: Soldering job advice needed - Door Nail 17:20:24 10/03/08 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
