RE: Well, except by putting a spressor across the contacts at source.

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Follow Ups Full Thread

Topic - Help .ac line nose. - jking67 19:59:01 01/05/08 (34)

Help .ac line nose. again ! - jking67 15:18:12 01/09/08 (14)

Why do you think I recommended twisting the ground around the ic"s? - jneutron 06:13:48 01/10/08 (13)

RE: Why do you think I recommended twisting the ground around the ic"s? - jking67 14:19:43 01/10/08 (12)

Al was on the right track with his post. - jea48 09:14:28 01/11/08 (9)

Line noise and then agian. - jking67 13:57:01 01/11/08 (8)

Does the motor have an AC capacitor across it? - jea48 17:56:29 01/11/08 (1)

RE: Does the motor have an AC capacitor across it? - jking67 05:35:37 01/12/08 (0)

Interesting. I would not expect a switch closure to cause a pop. - Al Sekela 15:21:08 01/11/08 (5)

RE: Interesting. I would not expect a switch closure to cause a pop. - jea48 09:54:48 01/13/08 (2)

It may well be the starting switch opening. - Al Sekela 15:36:31 01/15/08 (1)

No switch on the motor.... This type of motor does not use one - jea48 20:24:11 01/15/08 (0)

RE: Interesting. I would not expect a switch closure to cause a pop. - jking67 05:44:19 01/12/08 (1)

The oil burner... - Al Sekela 16:48:37 01/12/08 (0)

Ah, grasshopper, that is but one task along the path to quiet. - jneutron 06:24:29 01/11/08 (1)

RE: Ah, grasshopper, that is but one task along the path to quiet. - jking67 14:03:29 01/11/08 (0)

Thank goodness... - cheap-Jack 13:13:55 01/07/08 (10)

RE: Thank goodness... - jking67 17:09:49 01/07/08 (9)

If you get nowhere, do what I suggested.. - cheap-Jack 08:08:19 01/08/08 (0)

I guess you didn't read my post? - GTF 06:02:44 01/08/08 (1)

RE: I guess you didn't read my post? - jking67 13:32:11 01/08/08 (0)

wrap the ground wire around the cart ic's - jneutron 06:01:24 01/08/08 (5)

Well, except by putting a spressor across the contacts at source. - clifff 10:00:51 01/08/08 (4)

RE: Well, except by putting a spressor across the contacts at source. - jking67 15:01:32 01/09/08 (1)

he provided component values in a post lower down. - jneutron 06:07:00 01/10/08 (0)

RE: Well, except by putting a spressor across the contacts at source. - jneutron 10:15:55 01/08/08 (1)

Your points are well taken, but .. - clifff 14:54:57 01/08/08 (0)

wrap the turntable ground wire around the two IC's - jneutron 09:16:08 01/07/08 (0)

How close is your preamp to the furnace motor? - Al Sekela 20:48:26 01/06/08 (0)

RE: Help .ac line nose. - fotmasta 16:40:45 01/06/08 (0)

RE: Help .ac line nose. - bogartg 12:41:41 01/06/08 (0)

RE: Help .ac line nose. - zanash 03:07:53 01/06/08 (1)

RE: Help .ac line nose. - fotmasta 11:55:13 01/08/08 (0)

RE: Help .ac line nose. - GTF 21:26:34 01/05/08 (0)

RE: Help .ac line nose. - jea48 21:10:34 01/05/08 (0)

Not sure this is much help... - Ted Smith 20:45:17 01/05/08 (0)

Follow Ups

RE: Well, except by putting a spressor across the contacts at source. - jking67 15:01:32 01/09/08 (1)

he provided component values in a post lower down. - jneutron 06:07:00 01/10/08 (0)

Post a Message!