|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Best way to finish an aluminum chassis? posted by tommytube on October 3, 2005 at 09:55:18:
Buy some navel jelly. This is acid for removing rust. Just paint it on and let it sit 10 minutes to etch the surface. Then neutralize with baking soda and wash it really well.Spray on a good primer of your choice. I like sandable primer so I can get the surface really even.
Then spray with the paint of your choice. If you have an oven large enough you can bake enamels. Do not bake laquers.
Hope this helps some! I like the pebblized paints sometimes called splatter finish paints for equipment!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Here is how I do it.... - tubesforever 14:50:25 10/04/05 (3)
- Navel jelly - Alex M 08:57:20 10/05/05 (2)
- Navel jelly and Navel Lint - tubesforever 09:11:31 10/05/05 (1)
- Traditional naval jelly is phosphoric acid (same compound as in coca cola), nt - Montobo 20:09:15 10/05/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
