|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Problems with over-Voltaging the Mundorf Supreme S/O cap posted by jeffreybehr on August 13, 2005 at 12:33:22:
So, where (and how, in the circuit under question) did you over-voltage a 1200Vdc (850Vac) cap. This is not so easy to do.Yours in Anticipation,
Poinz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Over-Voltaging the Mundorf Supreme S/O cap - Poindexter 16:01:06 08/13/05 (9)
- 'Where' is the output-tube coupler, with maybe-860VDC on it... - jeffreybehr 18:13:33 08/13/05 (8)
- Well, - Poindexter 19:36:31 08/13/05 (7)
- My thought process is the same as yours, as in there's PLENTY... - jeffreybehr 23:40:40 08/13/05 (6)
- There's a lot of AC on a parafeed cap. - Poindexter 10:19:24 08/14/05 (5)
- Well, I figured out that 'Zpri' must mean 'resistance of the primary'... - jeffreybehr 15:44:06 08/14/05 (4)
- Re: Well, I figured out that 'Zpri' must mean 'resistance of the primary'... - Poindexter 16:35:43 08/14/05 (3)
- You asked about amp power; that's the 50 Watts I gave you. - jeffreybehr 22:14:39 08/14/05 (2)
- Downstream of a little research. - Poindexter 15:30:26 08/16/05 (1)
- Wow. TY. The original couplers were 3/1200s, apparently metallized 'propylenes. - jeffreybehr 18:42:58 08/16/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
