|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: DIY room lens finishing tubes in metal flake -'wild' help jon risch please posted by dennis shaw on January 29, 2000 at 04:50:43:
If you do decide to paint...that's alot of pipe you got to paint. If you have access to a good spraygun and compressor then it's fine, but if you use cans...hmmmm...that's a tough call because your limited by the can and its tip(spray width they give you). There might be a problem with peeling off as spraypaint has a difficult time sticking to edges. So take extra care when painting the end of the tubes and by knowing this try not to overspray as drips are a pain to deal with. Get a primer that's the same brand as the paint. Good Luck and you need alot of cans...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- finishing the tubes in metal flake paint - Joven 17:16:54 01/30/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]