time aligning tweeters/mids question

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

131.172.4.44

Hello all.
I'm in the middle of experimenting with tweeter to mid time aligning, and was wanting some input from others.
at the moment i have sunk the tweeter into the baffle (which is flat) using a router. its about 35mm in. i've got a piece of felt to help with the edge diffraction. now it sounds a lot better to me, but is the edge diffraction going to outweigh the gains?
i tried a sloped baffle, but the off axis response dip is terrible, and since i do quite a bit of listening off axis, its not an option.
is time delay via an active curcuit an option? (its a passive xo between mid and tweeter)
any input is greatly appreciated.
mark

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Topic - time aligning tweeters/mids question - mark 15:00:04 01/17/00 (5)

Re: time aligning tweeters/mids question - Jon Risch 14:58:33 01/19/00 (0)

Re: time aligning tweeters/mids question - patentguy 09:24:32 01/18/00 (3)

Re: time aligning tweeters/mids question - mark 14:24:15 01/18/00 (2)

Re: time aligning tweeters/mids question - patentguy 15:12:08 01/18/00 (1)

Re: time aligning tweeters/mids question - mark 21:31:19 01/21/00 (0)

You can not post to an archived thread.