|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Tweak AR cross over posted by cktc on July 31, 2000 at 22:57:30:
The salesman says it's unusual for capacitor value to be that high? I'm curious to know what experience he's had designing crossovers.
As far as replacement, go for the mid and tweeter series capacitors first as they will have the most influence on performance. If the price for replacement of the shunt caps is too high, by-pass them with small value (.1uF 100V) film caps. Replace the resistors with non-inductives (10 watt minimum). Leave the inductors alone unless you can replace them with new ones with the same inductance AND resistance. Be sure and note the polarity of the drivers so you can re-assemble properly.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Tweak AR cross over - R. Hertz 07:22:50 08/01/00 (2)
- Silly question - cktc 09:29:55 08/01/00 (1)
- Re: Silly question - Andy B 11:11:47 08/01/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
